Bidestilled Water: What It Is, Purity, and Pharmaceutical and Industrial Applications

What is bidistilled water?

Bidistilled water is water purified through two successive distillations, which remove virtually all mineral salts, organic contaminants, bacterial pyrogens, and dissolved gases. It achieves a higher purity than standard demineralized water, with electrical conductivity <1 μS/cm (vs <5 μS/cm for demineralized water). It corresponds to Purified Water in the European Pharmacopoeia (Ph.Eur.) and is also produced using reverse osmosis + distillation or high-purity EDI systems.

Bidistilled water for pharmaceutical and laboratory use

Differences between demineralized, bidistilled, and ultrapure water

  • Demineralized water: produced by ion exchange or reverse osmosis; conductivity <5 μS/cm; general industrial use
  • Bidistilled water (Ph.Eur. Purified Water): double distillation; conductivity <1 μS/cm; pharmaceutical, cosmetic, and laboratory use
  • Water for injections (WFI): distillation or reverse osmosis + ultrafiltration; pyrogen-free; conductivity <1.3 μS/cm at 25°C (Ph.Eur.)
  • Ultrapure water Type I: 18.2 MΩ·cm (0.055 μS/cm); for HPLC, ICP-MS, molecular biology

Main applications

Pharmaceuticals

Bidistilled water (Ph.Eur. Purified Water) is the basic pharmaceutical excipient for preparing oral and topical solutions, eye drops, dialysis solutions, and as a solvent for active ingredients. It must meet the conductivity, TOC (<500 μg/L), nitrate, and heavy metal limits of Ph.Eur. 2.2.3.

Chemical and biological laboratories

Solvent and diluent for buffer solutions, reagents, cell and microbiological cultures, PCR, and molecular biology. The absence of metallic and organic ions eliminates analytical interference.

Cosmetics

Used as the aqueous phase in cosmetic emulsions (creams, lotions, serums). Its higher purity compared to demineralized water ensures the absence of contaminants that could destabilize the formulation or cause irritation.

Electronics and optics industry

Final rinsing of electronic components, semiconductor wafers, and optical lenses, where any ionic residue would cause defects or corrosion.

Sterilization and autoclaving

Used to fill laboratory autoclaves and prepare sterile solutions. The absence of salts prevents limescale deposits in sterilization chambers.

Frequently Asked Questions

What is bidistilled water, and how does it differ from demineralized water?

Bidistilled water is purified through double distillation (conductivity <1 μS/cm) and corresponds to Ph.Eur. Purified Water. Demineralized water is produced by ion exchange or reverse osmosis (<5 μS/cm) and is less pure. Bidistilled water is required in pharmaceutical and laboratory applications where purity is critical.

Is bidistilled water the same as water for injections (WFI)?

No: WFI (Water for Injection) is pyrogen-free (bacterial endotoxins <0.25 EU/mL) and meets stricter microbiological requirements. Standard bidistilled water is not suitable for injectable preparations unless it passes apyrogenicity tests.

How should bidistilled water be stored?

In sealed borosilicate glass, PE, or PP containers, protected from light and environmental contamination. It is not sterile: once opened, it can become contaminated with microorganisms. Use within 24–48 hours of opening for critical applications.