Acrylic Thickener

What is an acrylic thickener?

An acrylic thickener is a rheology modifier based on acrylic polymers, used in water-based paints and coatings to control viscosity and behavior during application. The main families are ASE and HASE: the choice depends on the formulation, pH, and the required balance between stability, sag resistance, and leveling.

Acrylic thickener: at a glance

Aspect Indication
Function Viscosity and rheology control
Acrylic families ASE and HASE
Uses Water-based paints and coatings
Variables to check pH, binder, pigments, fillers, surfactants, and dosage
Dosage To be defined in the technical data sheet of the grade used and through formulation tests

What is it used for in water-based paints?

An acrylic thickener does not only make a paint thicker. It must contribute to a rheological profile suitable for storage, mixing, and application by brush, roller, or spray.

  • Stability: it can help limit the sedimentation of pigments and fillers.
  • Sag control: it helps regulate the behavior of the paint on vertical surfaces.
  • Application and finish: it influences flow, leveling, and splatter formation.

These effects depend on the chosen grade and the complete formulation: increasing viscosity does not automatically guarantee a better finish.

ASE and HASE acrylic thickeners: differences

Family General mechanism Evaluation criteria
ASE Alkali-swellable acrylic polymers; neutralization promotes viscosity development. pH, low-shear viscosity, and application behavior.
HASE Alkali-swellable acrylic polymers modified with hydrophobic groups; in addition to the neutralization effect, associative interactions occur. Interactions with binder and surfactants, rheological profile, and stability.
HEUR, for comparison Polyurethane associative thickeners, not acrylic. Compatibility and response in the complete formulation; they should not be classified as acrylic thickeners.

No family is inherently better than the others. Even products belonging to the same family can develop different rheological profiles.

Dosage, pH, and order of addition

The dosage of the acrylic thickener must be defined based on the commercial product, its active content, and the required viscosity. A percentage of the product as is does not equal the same percentage of the active polymer.

For ASE and HASE, neutralization is an important variable. The activation pH and operating range must be obtained from the technical data sheet of the grade used, without applying a single value to all products.

The order of addition, any dilution, and mixing conditions must follow the manufacturer's instructions. After incorporation, check the viscosity after the specified equilibration time and monitor stability over time.

How to choose and evaluate an acrylic thickener

Tests must use the complete formulation, including resin, pigments, fillers, dispersants, surfactants, and other additives. Compatibility with iron oxides and titanium dioxide should not be taken for granted.

Compare viscosity by indicating the method, temperature, and measurement conditions. When available, measurements at different shear conditions help evaluate both stability and application behavior. Supplement the data with sag, leveling, roller application, and storage tests.

Acrylic thickener or cellulose ether?

Cellulose ethers, such as HEC, constitute a different family from ASE and HASE acrylic modifiers. The choice, or possible combination, depends on the paint and the desired application profile. It must be experimentally verified, without assuming that the families are interchangeable at the same dosage.

FAQ on acrylic thickeners

What is an acrylic thickener?

It is a rheology modifier based on acrylic polymers that regulates the viscosity and behavior of water-based paints and coatings. The main families are ASE and HASE.

What is the difference between ASE and HASE?

ASEs develop viscosity through neutralization and polymer swelling. HASEs add hydrophobic groups that allow associative interactions with the formulation components.

Are HEURs acrylic thickeners?

No. HEURs are polyurethane associative thickeners. They can be compared with ASE and HASE when choosing the rheological system, but they belong to a different chemical family.

How much acrylic thickener is used in water-based paints?

There is no universal dosage. The product's technical data sheet must be followed, distinguishing between the product as is and its active content, and checking viscosity, application, and stability in the complete formulation.

Does pH affect acrylic thickeners?

Yes. For ASE and HASE, neutralization affects viscosity development. The activation pH and operating range depend on the grade and must be checked in the technical data sheet.

Is it compatible with iron oxides and titanium dioxide?

Compatibility must be verified in the complete formulation. Pigments, dispersants, binder, surfactants, and pH can modify the rheological response and stability.

Acrylic thickener for water-based paint rheology