What is 94% denatured ethyl alcohol?
Denatured ethyl alcohol (denatured ethanol) is ethanol (C₂H₅OH) to which chemical denaturants have been added—bitter or toxic substances that make it unsuitable for human consumption, thereby avoiding the application of excise duties on potable alcohol. In Italy, denaturing is regulated by the Consolidated Excise Duties Act (TUA, Legislative Decree 504/1995). The alcohol content of 94% vol. is the most common for industrial and cosmetic use, with classic denaturants such as bitrex (denatonium benzoate), isopropanol, or MEK.

Physicochemical properties
- Formula: C₂H₅OH (ethanol)
- Concentration: 94% vol. (± 0.3%)
- Density: ~0.807 g/cm³ at 20°C
- Boiling point: 78.1°C (pure ethanol); azeotrope with water at 78.1°C at 95.6% vol.
- Flash point: 13°C (highly flammable)
- Solubility: miscible with water, acetone, ether, chloroform, and most organic solvents
- ADR classification: class 3 (flammable liquid), UN 1170
Main applications
Cosmetics and perfumery
Denatured ethanol at 94–96% is the base solvent for perfumes, eau de toilette, aftershave lotions, sanitizing gels, and hair products. The high alcohol content ensures rapid evaporation and solubilization of fragrances. The denaturant used must be compatible with EC Reg. 1223/2009 (cosmetics).
Industrial cleaning and degreasing
Effective solvent for removing flux residues from circuit boards, cleaning metal surfaces before painting, and degreasing optical components. Evaporates completely without residue.
Painting and varnishes
Thinner for alcohol-based paints and varnishes (shellac, nitrocellulose in mixture), printing inks, and fast-drying enamels. Improves wettability and reduces viscosity.
Laboratory
Extraction solvent, washing reagent, precipitant for polysaccharides and proteins. Used for the sterilization of laboratory surfaces and equipment (effective against vegetative bacteria and enveloped viruses).
Surface disinfection
Effective as a bactericidal and virucidal disinfectant for hard surfaces. The optimal concentration for disinfection is 70–80% vol. (dilution enhances the effect by allowing penetration into the bacterial cell): 94% ethanol should be diluted with demineralized water to optimize its disinfectant efficacy.
Precautions and PPE
- Flammability: flash point 13°C—keep away from heat sources, sparks, and open flames
- Gloves: nitrile (short-term protection), butyl for prolonged exposure
- Ventilation: mandatory—vapors are heavier than air and accumulate at low levels
- Containers: ATEX-approved HDPE, stainless steel, or aluminum; avoid PVC
- Toxicity: denaturants make the product non-potable; in case of ingestion, contact emergency services
Frequently Asked Questions
What is denatured ethyl alcohol, and why is it denatured?
Denatured ethyl alcohol is ethanol made non-potable by adding chemical denaturants (bitrex, isopropanol, MEK). Denaturing exempts it from excise duties on potable alcohol, significantly reducing its cost for industrial and cosmetic uses.
What is the optimal concentration for disinfection?
The optimal concentration for bactericidal disinfection is 70–80% vol. 94% ethanol should be diluted with demineralized water (e.g., 74 parts alcohol + 26 parts water) to maximize its disinfectant efficacy.
Can denatured ethyl alcohol be used in cosmetics?
Yes, if denatured with substances approved by EC Reg. 1223/2009. The denaturants must be compatible with the cosmetic formulation and not cause irritation. The most commonly used denaturant in cosmetics is bitrex (denatonium benzoate) at very low concentrations.
What is the difference between denatured alcohol and isopropyl alcohol?
Denatured ethyl alcohol is ethanol (C₂H₅OH) with denaturants; isopropyl alcohol is propan-2-ol (C₃H₇OH), a different secondary alcohol. IPA evaporates more slowly (b.p. 82°C vs 78°C), is more degreasing, but is not permitted in cosmetics as a primary solvent.