Retarder for Concrete

What is concrete shrinkage compensation?

Concrete shrinkage compensation is a shrinkage-compensating additive that can help reduce volumetric cracking during setting. The mechanism depends on the product's composition and the cement formulation. Its use in industrial flooring and jointless screeds must be designed and verified based on the mix, reinforcement, substrate, and site conditions.

FIBRATEC-CR: technical characteristics

FIBRATEC-CR shrinkage compensation, distributed by Pigment Al, is available in 20 kg bags. Compatibility with plasticizers, fibers, and other additives must be verified for the specific formulation and in accordance with the technical data sheet.

Parameter Indication
Form Powder in 20 kg bags
Indicative dosage 3–12 kg/m³, or approximately 1–3.5% by weight of cement
Dosage for repair mortars 0.5–1.5% by total weight of the mix
Method of addition Dry addition at the batching plant or on site using a concrete mixer, according to the technical procedure
Compatibility To be verified with chemical additives, plasticizers, and fibers
Jointless surfaces Indicative values to be verified with the design, reinforcement, and technical data sheet

How FIBRATEC-CR works

FIBRATEC-CR is described as a product that promotes the formation of crystals within the cement matrix during setting. These crystals can help compensate for some of the volumetric shrinkage. The final result also depends on the water/cement ratio, aggregates, reinforcement, curing, substrate, and environmental conditions.

  • Possible reduction in shrinkage cracking, to be verified in the actual system
  • Possible contribution to permeability control
  • Possible improvement in mechanical performance, depending on the mix
  • Possibility of reducing joints only when planned in the design and technically validated

Dosages for application

Application Indicative dosage Notes
Industrial flooring 8–12 kg/m³ The jointless surface depends on reinforcement, substrate, and design
Screeds 5–8 kg/m³ The indicated surface must be verified with microfibers and the design
Standard structural concrete 3–6 kg/m³ Assess the reduction in cracking through testing
Repair mortars 0.5–1.5% by total weight Compatibility to be verified with the cement mortar
Cement reduction 8–12 kg/m³ To be assessed only with type 52.5 cement and technical validation

How to use FIBRATEC-CR

  1. Determine the dosage: choose the value within the indicative range of 3–12 kg/m³ based on the mix and the required performance.
  2. Add dry: at the batching plant together with the aggregates or on site using a concrete mixer, following the product procedure.
  3. Verify compatibility: perform tests with plasticizers, fibers, and other additives present in the mix.
  4. Check the result: assess cracking, workability, strength, and curing in the actual system before production.

FAQ — Frequently Asked Questions

What is concrete shrinkage compensation and what is it used for?

It is an additive that can help compensate for volumetric shrinkage during setting and reduce cracking. Its suitability for jointless flooring or screeds must be verified with the design and testing.

How does FIBRATEC-CR work in concrete?

It promotes the formation of crystals in the cement matrix, which can help compensate for some of the volume loss during setting. The effect depends on the entire formulation and the application conditions.

What is the indicative dosage of FIBRATEC-CR?

As a reference, a range of 3–12 kg/m³ is considered, or approximately 1–3.5% by weight of cement. For repair mortars, a dosage of 0.5–1.5% by total weight of the mix is considered.

Is FIBRATEC-CR compatible with other additives?

Compatibility must be verified with the complete formulation. Preliminary tests with plasticizers, fibers, and other chemical additives are recommended before production.

What surfaces can be created without joints?

The values of 225 m² for screeds and 1,000 m² for slabs are indications related to specific systems, microfibers, reinforcement, and design conditions. They should not be considered universal: check the technical documentation.

Does FIBRATEC-CR allow for a reduction in cement dosage?

The reduction can only be assessed with type 52.5 cement, laboratory tests, and verification of the required performance. It should not be automatically applied to every mix.

Is FIBRATEC-CR available in my region?

Availability and the sales representative depend on the area. Contact us to find the most suitable channel.

FIBRATEC-CR concrete shrinkage compensation additive for flooring and screeds