Colored Asphalt

What is colored asphalt?

Colored asphalt is a bituminous pavement produced by adding pigments to the mix or using binders suitable for the desired shade. Iron oxides are among the most commonly used pigments for producing red, yellow, brown, and black colors due to their resistance to heat, light, and outdoor environments.

The choice of pigment, binder, and dosage depends on the final color, the type of plant, the processing temperature, and the intended use. Before production, it is always recommended to conduct a test using the actual raw materials.

Types of colored asphalt

Hot-mix colored asphalt

The pigment is dosed during the production of the mix. Iron oxides must be uniformly dispersed and selected based on the processing temperature and the required shade.

Cold-mix colored asphalt

It is used for localized repairs, maintenance, road markings, and decorative applications. The compatibility of the pigment must be checked with the emulsion or binder used.

Stamped asphalt and surface treatments

Color can also be applied using surface systems, resins, or specific hardeners. In this case, durability depends on the application cycle, the preparation of the substrate, and traffic.

Pigments and shades

  • Red iron oxide: brick-red and terracotta shades, common for cycle paths and urban areas.
  • Yellow iron oxide: ochre and yellow shades; stability at the process temperature must be checked.
  • Black iron oxide: dark gray and anthracite shades.
  • Brown oxides or mixtures: earth tones and decorative finishes.
  • Chrome oxide: used in some green systems, subject to technical and regulatory verification.

RAL references are indicative: the actual color changes depending on the bitumen, aggregates, dosage, thickness, and laying conditions.

Dosage of red iron oxide: reference based on aggregates

The technical note entitled “Bitumen coloring”, provided by Pigment Al for this guide, indicates a dosage of 6% by weight of the aggregates, excluding the bitumen for red iron oxide. The calculation basis is essential: 6% of the aggregates does not equal 6% of the bitumen or 6% of the total weight of the mix.

This is a reference from the note for the described formulation, not a universal dosage for all pigments, binders, and plants. The copy consulted does not indicate the author, date, or commercial grade of the pigment: the recipe must be verified with the technical manager, material documentation, and laboratory and plant tests before use.

Temperatures, bitumen, and mixing reported in the note

  • Red iron oxide: 6% by weight of the aggregates, excluding the bitumen.
  • Aggregates: indicated temperature of 135–140 °C.
  • Bitumen: indicated temperature of 150 °C and quantity equal to 6% by weight of the aggregates.
  • Mixing: the note requires “long mixing,” without specifying a duration. It is therefore not possible to derive a universal number of minutes.
  • Filler: the note suggests not adding the filler if planned, attributing this function also to the iron oxide. This indication should be evaluated in the design of the particle size distribution curve and the mix, not applied as an automatic elimination of the filler in every mix.

The note also states that further increasing the percentage of pigment would not provide any advantages and could be detrimental to the described recipe. This does not define a general threshold for every mix. Temperatures, dosages, and filler replacement require confirmation for the materials actually used.

Applications

  • cycle paths and pedestrian walkways;
  • reserved lanes and crossings;
  • roundabouts and urban areas;
  • parking lots and decorative pavements;
  • landscaping and architectural projects.

Durability and color stability

Iron oxides generally offer high resistance to light and atmospheric agents. However, the appearance of the pavement may change over time due to wear, dirt, aggregate polishing, and binder characteristics. The final performance must be evaluated on the complete system, not just the pigment.

Standards and technical verifications

Compliance must be verified for the pigment and the specific intended use. Standard EN 12878 concerns pigments intended for coloring cement- and/or lime-based construction materials and should not be automatically presented as certification for bituminous asphalt. For road works and road markings, the specifications, standards, and indications of the competent authority must also be respected.

Frequently asked questions

What pigment is used to color asphalt?

Iron oxides are commonly used for red, yellow, brown, and black shades. The choice depends on the processing temperature, the binder, and the required color.

What is the dosage of iron oxide in asphalt?

The “Bitumen coloring” note reported in this guide indicates, for the red oxide in the described recipe, 6% by weight of the aggregates, excluding the bitumen. It is not a percentage of the bitumen or a universal prescription: the dosage must be confirmed for the specific grade and the actual mix with laboratory and plant tests.

Does colored asphalt fade?

Iron oxides generally have high light stability, but the appearance may change due to wear, dirt, aggregates, and binder aging.

Can it be used for cycle paths?

Yes, colored asphalt is frequently used for cycle paths and urban walkways. The color and system must comply with the project and the prescriptions of the competent authority.

Is it more expensive than traditional asphalt?

Generally yes, due to the cost of the pigment, any light binders, and dedicated processing. The difference varies depending on the color, the system, and the quantity produced.


Colored asphalt with iron oxide-based pigments