Wetting Agents for Water-Based Paints
Wetting agents for water-based paints (or wetting agents) are surfactants that reduce the surface tension of water, facilitating the wetting of pigments, fillers, and the substrate. In water-based paints, they perform two distinct functions: pigment wetting during grinding (substrate wetting) and substrate wetting during application (substrate wetting). A poorly chosen or overdosed wetting agent can cause excessive foaming, reduced adhesion, and film defects.
In short
- Typical dosage: 0.05–0.5% of the total weight of the formulation
- Types: anionic, non-ionic, silicone
- Add to the initial aqueous phase, before the pigments
- Compatible with iron oxides, TiO₂, and mineral fillers
- Caution: wetting agents can generate foam — always use with antifoam
Pigment wetting vs substrate wetting
| Function | Addition stage | Preferred type | Effect |
|---|---|---|---|
| Pigment wetting (pigment wetting) | Initial aqueous phase, before grinding | Anionic or non-ionic | Facilitates dispersion, reduces grinding time |
| Substrate wetting (substrate wetting) | Completion, after the binder | Silicone or non-ionic | Improves application on difficult substrates, reduces cratering |
Compatibility with inorganic pigments
- Iron oxides (red, yellow, black): excellent compatibility with anionic and non-ionic wetting agents
- TiO₂: prefer non-ionic or silicone to avoid interference with the dispersant
- Cobalt blue and chrome green: non-ionic or silicone at low dosages
FAQ — Frequently Asked Questions
What is the correct dosage of wetting agent in water-based paints?
0.05–0.5% of the total weight of the formulation. Silicone agents are effective at very low dosages (0.05–0.15%); anionic and non-ionic agents require 0.1–0.3%. Always determine the optimal dosage with laboratory tests.
What is the difference between a wetting agent and a dispersant?
The wetting agent reduces surface tension to facilitate the initial wetting of the pigment. The dispersant stabilizes the dispersion over time by preventing re-flocculation. In professional formulations, both are used in combination.
Do wetting agents cause foaming?
Yes, wetting agents — especially anionic ones — can generate foam during mixing and application. They must always be combined with a suitable antifoam to prevent bubbles and cratering in the dried film.
Does silicone wetting agent cause fish eyes?
If overdosed or incompatible with the binder, yes. Use at the minimum effective dosage (0.05–0.1%) and always test compatibility with the specific acrylic binder before final formulation.
When is the wetting agent added to the formulation?
Pigment wetting agent is added to the initial aqueous phase, before grinding. Substrate wetting agent is added during completion, after the binder, to improve application spreadability.
We have 3 types with different prices and concentrations 