Architectural Concrete and Exposed Aggregate
Exposed aggregate concrete (exposed aggregate or positive-face exposed aggregate concrete) is an architectural finishing technique that exposes the concrete's aggregates, creating aesthetically pleasing, non-slip surfaces. It is achieved by applying a retarding agent to the surface of the formwork or fresh concrete, which delays the surface setting of the cement, allowing the cement paste to be washed away and the gravel or crushed stone to be exposed.

Exposed Aggregate Concrete Techniques
| Technique | Description | Typical Application |
|---|---|---|
| Positive-face exposed aggregate | Retarding agent applied to the formwork before pouring | Precast products, architectural panels |
| Negative-face exposed aggregate | Retarding agent applied to the fresh concrete | Pavements, cast-in-place slabs |
| Exposed aggregate flooring | Decorative aggregates laid on a bed of retarded mortar | Pedestrian and vehicular pavements |
Wash Depth and Retarding Agent Versions
| Retarding agent version | Wash depth | Aesthetic effect |
|---|---|---|
| Light (L) | 0.5–1.5 mm | Barely visible aggregates, fine finish |
| Medium (M) | 1.5–3 mm | Clearly visible aggregates, classic effect |
| Strong (F) | 3–5 mm | Very prominent aggregates, rustic effect |
| Extra strong (XF) | 5–7 mm | Large exposed aggregates, bold effect |
How to Create Positive-Face Exposed Aggregate Concrete
- Formwork preparation: clean the formwork and apply a release agent.
- Application of the retarding agent: spray or brush it evenly onto the formwork before pouring. The dosage depends on the version and desired wash depth.
- Pouring the concrete: pour the concrete as usual. The retarding agent delays the setting of the surface layer in contact with the formwork.
- Stripping and washing: after curing (typically 12–24 hours), strip the formwork and wash with pressurized water to remove the unhardened cement paste and expose the aggregates.
- Final protection: apply a water-repellent sealer or concrete protector to preserve the finish over time.
Decorative Aggregates for Exposed Aggregate
- River gravel: rounded, natural effect, neutral colors
- Marble chips: angular, elegant effect, available in white, gray, and pink
- Granite: highly resistant, rustic effect, dark colors
- Quartz: brilliant, decorative effect, available in many colors
- Colored aggregates: can be combined with iron oxides for custom color effects
FAQ — Frequently Asked Questions
What is positive-face exposed aggregate concrete?
Positive-face exposed aggregate concrete is a finishing technique in which a retarding agent is applied to the formwork before pouring. After stripping the formwork, the surface cement paste is washed away with pressurized water, exposing the aggregates.
What is the difference between positive-face and negative-face exposed aggregate?
In positive-face exposed aggregate, the retarding agent is applied to the formwork before pouring (used for precast products and panels). In negative-face exposed aggregate, the retarding agent is applied to the fresh concrete after placement (used for pavements and cast-in-place slabs).
How long after pouring can the concrete be washed?
Typically 12–24 hours after pouring, depending on the temperature, type of cement, and version of retarding agent used. Washing too soon risks damaging the structure; waiting too long causes the cement paste to harden and become impossible to remove.
Which retarding agent should be used for a 3 mm depth?
The Strong (F) version provides a wash depth of 3–5 mm, with clearly visible aggregates and a rustic effect. For shallower depths, use the Medium (M) version for 1.5–3 mm.
Does exposed aggregate require maintenance?
Yes, it is recommended to apply a water-repellent sealer every 3–5 years to protect the aggregates from the elements and prevent dirt from accumulating between the grains.