What is deactivated draining CLS?
Deactivated draining concrete combines the permeability of an open-structure mix with an exposed aggregate surface finish. The deactivator locally slows the setting of the surface cement paste, which is subsequently removed by controlled washing.
The result depends on the concrete formulation, the aggregate grading, the product applied, the environmental conditions, and the working times. It is therefore necessary to perform a preliminary test and follow the technical data sheet of the system used.
PV DRAIN for exposed aggregate finish
PV DRAIN is intended for the surface deactivation of draining CLS. It is applied to the fresh pour to facilitate the subsequent exposure of the aggregates. Compatibility, consumption, depth of action, and washing times must be defined based on the technical data sheet and site conditions.
Application phases
1. Preparation and concrete placement
Produce and place the draining CLS according to the mix design, controlling consistency, compaction, and surface regularity. Any pigments must be dosed and dispersed uniformly in the mix.
2. Deactivator application
Apply PV DRAIN evenly on the fresh surface following the consumption, equipment, and methods indicated by the manufacturer. Avoid accumulations, uncovered areas, and late applications.
3. Surface protection
Protect the pour from rain, wind, rapid drying, and contamination. Temperature and environmental conditions affect the setting and the appropriate time for washing.
4. Washing
Remove the unhardened surface layer using a method and pressure compatible with the system. The correct timing is not fixed: it must be established through tests and based on technical indications, avoiding both premature and late washing.
Applications
- driveways and pedestrian paths;
- courtyards, gardens, and residential areas;
- squares and public spaces;
- commercial and hospitality areas;
- permeable decorative pavements.
Factors affecting the result
- Aggregates: color, shape, and grading determine the final appearance.
- Mix: water/cement ratio, paste, and void percentage affect permeability and finish.
- Application: uniformity and quantity of the deactivator affect the depth of exposure.
- Climate: temperature, wind, and humidity change the operating times.
- Washing: pressure and timing must avoid excessive aggregate detachment.
Permeability and performance
Deactivation affects the surface, but the permeability and strength of the pavement depend on the mix design, placement, and correct washing. Performance must be verified on the finished system; it is incorrect to assume that the treatment always improves drainage or never affects strength.
Colored draining CLS
The system can also be evaluated on pigmented mixes. Iron oxides and other pigments must be compatible with the cement matrix and dosed based on the binder weight. Before production, it is recommended to make a sample to check color tone, aggregate exposure, and uniformity.
Frequently asked questions
Does PV DRAIN reduce the permeability of draining CLS?
Performance depends on the entire system. If application and washing are performed correctly, the finish can maintain the open structure planned in the design; permeability must still be verified on the finished pavement.
Can it be used on colored draining CLS?
It can be evaluated on pigmented mixes, after verifying compatibility and making a sample with the actual materials.
When is PV DRAIN applied?
It is applied to the fresh surface according to the technical data sheet instructions. The timing depends on the product and placement conditions.
When is washing performed?
The waiting time varies with formulation, temperature, and climate. It must be defined with a preliminary test and the manufacturer's instructions.
Conclusion
Deactivated draining CLS allows for the creation of permeable pavements with exposed aggregate. For a uniform result, it is necessary to coordinate mix design, placement, deactivator application, protection, and washing.