NATURAL BEESWAX

Natural Beeswax for Building and Decorative Finishes: Technical Guide

Natural beeswax is a completely natural finishing product, free from synthetic solvents, used to protect and polish surfaces in Venetian plaster, spatulated plaster, lime, wood, and natural stone. It forms a thin water-repellent film that enhances textures, protects against surface moisture, and provides a glossy or satin finish depending on the application method.

Natural beeswax for Venetian plaster, lime, and decorative finishes

Technical characteristics

Parameter Value
Composition Pure natural beeswax, without synthetic solvents
Appearance Solid amber-yellow paste
Melting point 62–65°C
Finish Glossy or satin (depending on polishing)
Coverage 50–100 g/m² (depending on the porosity of the substrate)
Application Spatula, sponge, cotton cloth
Drying time 30–60 minutes before polishing

Main applications

Substrate Effect Notes
Venetian plaster Glossy, waterproofing Apply in 1–2 coats after complete drying
Decorative spatulated plaster Satin, protective Polish with a dry cotton cloth
Lime plaster Water-repellent, matte-satin Substrate must be completely carbonated
Raw or treated wood Nourishing, protective Apply warm for greater penetration
Natural stone and marble Protective, enhances veining Test on a sample to check absorption

Other waxes available

If you are looking for a wax in an aqueous formulation, easier to apply and odorless, discover our guide to emulsion waxes: beeswax and synthetic waxes in aqueous dispersion for Venetian plaster, lime, wood, and floors.

FAQ — Frequently Asked Questions

Is natural beeswax suitable for Venetian plaster?

Yes, it is the traditional finishing product for Venetian plaster. Applied in 1–2 coats after complete drying and polished with a cotton cloth, it provides the characteristic shine and waterproofs the surface.

Does beeswax protect against moisture?

Yes, it forms a water-repellent film that protects the surface from surface moisture and water splashes. It is not suitable for surfaces in direct and prolonged contact with water (e.g., showers, bathtubs).

How do you apply natural beeswax?

Apply with a spatula, sponge, or cotton cloth in a thin, even layer. After 30–60 minutes, polish with a dry cotton cloth using circular motions. For greater penetration on wood, it can be applied slightly warmed.

Is beeswax compatible with lime?

Yes, but the substrate must be completely carbonated (at least 4–8 weeks for aerial lime). Apply to dry surfaces at room temperature between 10°C and 30°C.

What is the coverage of beeswax per square meter?

50–100 g/m² depending on the porosity of the substrate. Very porous substrates such as raw lime require higher dosages compared to already sanded plasters.