Open Time Wax for Water-Based Paints and Coatings

What is open-time wax for water-based paints?

Open-time wax is an aqueous emulsion additive that extends the open time of water-based paints and coatings. It works by forming a surface film that slows down water evaporation, allowing the fresh film to be worked and corrected for longer. It is particularly useful in conditions of high temperature, low humidity, or on highly absorbent substrates.

How does open-time wax work?

Open-time waxes slow down the evaporation of water from the fresh film. This allows for:

  • Extended working time with a brush or roller
  • Reduced lap marks in roller-applied paints
  • Improved film levelability
  • Easier application over large surfaces
  • Working in difficult weather conditions (heat, wind, low humidity)

Product Pigment Al: P-CER 16

P-CER 16 is an aqueous emulsion of fatty compound derivatives. It is used to extend the open time in paints and coatings and acts as a plasticizer, reducing the risk of cracking in the dried film.

ParameterValueAppearanceWhite liquidSolid content30.5–32.5%PhaseAqueouspH7.0–9.0Dosage0.2–2% of the total formulation (can be increased as needed)Storage12 months — 5–35°C, protect from frost

Applications by product type

Wall paints

In wall paints, P-CER 16 is added to reduce lap marks when roller-applying over large surfaces. Typical dosage: 0.2–2% by total weight.

Decorative and trowel-applied coatings

In decorative coatings and trowel-applied products, open time is critical for achieving uniform effects. P-CER 16 extends the working window, allowing textures and gradients to be created without lap marks. Dosage: 0.5–2%.

Paints for wood and absorbent surfaces

On highly absorbent substrates such as raw wood, P-CER 16 slows down the rapid absorption of the film, ensuring a more uniform application. Dosage: 1–2%.

Anti-cracking paints

Thanks to its plasticizing action, P-CER 16 reduces the risk of cracking in the dried film, which is particularly useful during seasonal thermal cycles. Dosage: 1–2%.

How to incorporate P-CER 16 into water-based paints

  1. Add during the final stage of production, after the dispersion of pigments and fillers
  2. Slow agitation: mix under gentle agitation for 5–10 minutes
  3. Temperature: avoid temperatures above 40°C to prevent destabilizing the emulsion
  4. Check compatibility: always test on a small scale with the specific binder system

Effects on the formulation

ParameterEffect of P-CER 16Open timeSignificantly increasesLevelabilityImprovesLap marksReducesCracking riskReduces (plasticizing action)ColorNo alterationPigment compatibilityFull compatibility with iron oxides and TiO₂

P-CER 16 open-time wax for water-based paints and coatings

Related articles

Frequently Asked Questions About Open-Time Wax

What is open time in water-based paints?

Open time is the period during which the fresh paint film can be worked, corrected, or touched up without leaving lap marks. It depends on temperature, humidity, substrate absorption, and the paint formulation.

Does open-time wax change the color of the paint?

No, P-CER 16 in aqueous emulsion does not alter the color of the paint. It is compatible with iron oxides, titanium dioxide, and all major inorganic pigments.

Can I use P-CER 16 in exterior paints?

Yes, it is particularly useful for exterior paints applied in hot or windy conditions. The plasticizing action also reduces the risk of cracking during seasonal thermal cycles.

What is the difference between open-time wax and a drying retarder?

Drying retarders (such as propylene glycol) act chemically by slowing down the coalescence of the binder. Open-time waxes act physically by forming a surface film that slows down evaporation. They are often used in combination to maximize open time.