Ferric Chloride: The Effective Solution for Your Needs

Ferric Chloride: Complete Technical Guide

Ferric chloride is an inorganic iron salt used mainly as a coagulant and flocculant in wastewater and drinking water treatment. The 40–41% aqueous solution from Pigment Al removes phosphates, suspended solids, heavy metals, and organic compounds, while also controlling unpleasant odors caused by sulfides.

Ferric chloride FeCl₃ in 40% aqueous solution – coagulant flocculant for wastewater treatment

Technical specifications

ParameterValueChemical formulaFeCl₃Concentration40–41% by weight of FeCl₃Fe(III) content13.4–14.2% by weightFormLiquid aqueous solutionColorDark brownOptimal operating pH4–9 (optimal 5.5–8.5)Compatible containersHDPE, PVC, fiberglass (non-metal)ClassificationHazardous: corrosive, causes skin burns and eye damage

Main applications

ApplicationTypical dosageNotesMunicipal wastewater10–50 mg/LRemoval of suspended solids and phosphatesIndustrial wastewater20–100 mg/LRemoval of heavy metals and organic compoundsDrinking water2–10 mg/LApproved for drinking water use in many countriesFe:P molar ratio = 1.5–2.5Determine by jar testOdor control (sulfides)VariablePrecipitates sulfides as FeS

Advantages over other coagulants

  • Effective at acidic pH: maintains good performance even at pH 4–5, where other coagulants fail
  • Superior phosphate removal: more efficient than aluminum sulfate at precipitating phosphates
  • Odor control: precipitates sulfides as FeS, reducing unpleasant odors
  • Wide pH range: effective from pH 4 to pH 9

Safety and handling

Ferric chloride at 40/41% is classified as hazardous:

  • Causes severe skin burns and eye damage
  • Harmful if swallowed
  • Corrosive to metals

Mandatory PPE: nitrile or neoprene gloves, sealed safety goggles, acid-resistant clothing. In case of contact with skin or eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention.

FAQ — Frequently Asked Questions

What is ferric chloride and what is it used for?

Ferric chloride (FeCl₃) is an inorganic iron salt used mainly as a coagulant and flocculant in wastewater and drinking water treatment. It removes phosphates, suspended solids, heavy metals, and organic compounds, and controls unpleasant odors caused by sulfides.

What is the concentration of Pigment Al ferric chloride?

The aqueous solution has a concentration of 40–41% by weight of FeCl₃, with an Fe(III) content between 13.4% and 14.2% by weight.

Is ferric chloride hazardous?

Yes. Ferric chloride at 40/41% is classified as hazardous: it causes severe skin burns and eye damage, is harmful if swallowed, and is corrosive to metals. Gloves, safety goggles, and suitable clothing must be worn during handling.

At what pH does ferric chloride work best?

Ferric chloride is effective in a pH range of 4 to 9, with optimal performance between 5.5 and 8.5. It is particularly advantageous compared to other coagulants because it maintains good performance even at acidic pH (4–5).

How is the ferric chloride dosage calculated?

The optimal dosage is determined by a laboratory jar test. For phosphate removal, an Fe:P molar ratio of 1.5–2.5 is used. For municipal wastewater, the typical dosage is 10–50 mg/L.

Can ferric chloride be used for drinking water?

Yes, it is approved for drinking water treatment in many European countries, at reduced dosages (2–10 mg/L) and in compliance with applicable local regulations.

What containers is ferric chloride stored in?

HDPE, PVC, or fiberglass containers. Avoid metal containers, as the product is corrosive to metals. Store in a cool, ventilated place away from direct sunlight.