Photocatalytic titanium dioxide dispersion for self-cleaning surfaces and air purification

Photocatalytic titanium dioxide dispersion

Our photocatalytic titanium dioxide dispersion is a concentrated and stabilized aqueous suspension of ultrafine titanium dioxide (TiO₂) with an anatase crystal structure, characterized by excellent photocatalytic activity in the presence of natural or artificial UV light. With a TiO₂ content of approximately 20% and particles measuring between 100 and 200 nm, it represents an advanced solution for high-performance photocatalytic applications.

Technical specifications

  • Appearance: White dispersion
  • TiO₂ content: approximately 20%
  • Base: Water
  • Density: approximately 1.20 g/cm³
  • Odor: None
  • Chemical nature: Concentrated anatase titanium dioxide dispersion
  • Particle size: 100–200 nm
  • Stability and storage: 12 months at 20°C in the original closed containers

How does photocatalysis with TiO₂ work?

Titanium dioxide in the anatase phase is the photocatalyst par excellence. When exposed to UV light, it generates highly reactive free radicals (mainly hydroxyl radicals •OH) that break down organic and inorganic molecules present on the surface or in the surrounding air. The process is continuous, self-cleaning, and does not consume the catalyst.

The main effects of photocatalysis are:

  • ✅ Self-cleaning effect: breaks down organic dirt deposited on surfaces
  • ✅ Air purification: reduces NOx, SOx, VOCs, and other atmospheric pollutants
  • ✅ Removal of unpleasant odors: oxidizes the molecules responsible for bad odors
  • ✅ Antibacterial activity: breaks down the cell membranes of bacteria and microorganisms

Product properties

It is designed and optimized as a pure photocatalyst:

  • TiO₂ without pigmentary properties: does not alter the aesthetic appearance of treated surfaces
  • Anatase crystal structure: the most photocatalytically active phase
  • Breakdown of organic and inorganic molecules under UV light
  • Recommended for applications with a neutral or alkaline pH

    Anatase titanium dioxide aqueous dispersion for photocatalytic surfaces

Main applications

It is used in numerous sectors of construction and environmental treatment:

  • Exterior applications: facades, coatings, surfaces exposed to the elements
  • Self-cleaning effect on glass, ceramics, and various building materials
  • Air and water purification: breakdown of NOx, SOx, VOCs, and organic molecules
  • Removal of unpleasant odors in indoor and outdoor environments

Directions for use and dosage

It is supplied as a concentrate and must be diluted according to the specific requirements of the application:

  1. Add the product to water and mix thoroughly
  2. The product tends to settle over time: normal mixing is sufficient to restore the dispersion without altering the particle size
  3. The application temperature must be between 5°C and 30°C
  4. The quantity varies depending on the desired TiO₂ content in the final product

Important: preliminary tests are recommended before treatment to avoid unwanted effects.

Safety

The safety instructions are listed in the product safety data sheet and must be strictly observed. Adequate ventilation of the work area is required during use.

Conclusion

This photocatalytic titanium dioxide dispersion represents a technologically advanced solution for those seeking a highly efficient anatase TiO₂-based photocatalyst. Thanks to its concentrated aqueous formulation, it can be easily incorporated into paints, coatings, and surface treatments, offering concrete benefits in terms of self-cleaning, air quality, and environmental sustainability.

Do you need technical support or would you like to request information? Contact us by email at info@pigmental.it: our team is at your disposal.