AR FIBRATEC fiberglass: guide for V12-AM, V13-MO and V6

Fibratec AR glass fibres are intended for the widespread reinforcement of cementitious matrices.
Pigment Al distributes these fibres through a network of agents, assisting companies, applicators and manufacturers in requesting technical information and supply quotations.

The range illustrated in the catalogue includes V12-AM for concrete, V13-MO for mortars and coatings, and V6 for applications requiring a finer finish. The choice depends on the material, the process and the required performance: the versions are not automatically interchangeable.

Fibres for warehouses, flooring, paint shops and premix manufacturers

Fibratec fibres are used by many Italian warehouses, paint shops, and manufacturers of concrete and premixes. According to Pigment Al's commercial experience, the applications documented by the partner include concrete flooring, mortars, plasters, coatings and self-levelling compounds: the version and dosage must be chosen based on the formulation and process.

For concrete flooring, V12-AM is the version to consider in relation to the intended use, loads and slab characteristics. For paint shops and premix manufacturers, V13-MO is referenced in the applications described by the partner for mortars, plasters, facade paints and coatings. In industrially formulated products, dispersion, workability, finish and the performance of the final mixture must be checked.

Fibres in membranes: possible contribution to micro-cracking control

In the development of a waterproofing membrane or coating, the use of fibres can be considered as a formulation measure aimed at improving micro-cracking control. The possible benefit must be verified with comparative tests on the specific membrane, also checking fibre dispersion, workability and finish.

Technical note: the Fibratec sources consulted mention coatings, chlorinated rubber and slurry, but do not demonstrate general suitability for all membranes. Before use, the version and dosage must be confirmed with the partner, and the waterproofing, adhesion, elasticity and crack-bridging capacity of the finished system must be verified. Improvement is not guaranteed, and the fibre alone is not attributed with a waterproofing function.

Video: Colorificio Scaperrotta's experience

The video presents an application example shared by Colorificio Scaperrotta, relating to the use of Fibratec fibres in a membrane. It is an experience related to a specific formulation: compatibility, fibre version and dosage must be verified for the product used.

Watch the Colorificio Scaperrotta video on YouTube too.

This guide complements the Fibratec Italia brochure and public pages.
The data declared by the partner do not replace a project specification.

Download the Fibratec V12-AM, V13-MO and V6 catalogue in PDF (approximately 11.5 MB).

What does AR glass fibre mean?

The AR acronym indicates alkali resistance, a relevant characteristic in cementitious matrices.
For V12-AM, the catalogue declares a zirconium (ZrO₂) content of 17.1%.
These fibres are not polypropylene fibres: the material and specifications of use are different.

The fibres are distributed in the mix and constitute a widespread reinforcement in the volume.
This does not mean that every fibre or dosage can replace reinforcement provided for by the design.

Fibratec V12-AM for concrete flooring

Our partner describes V12-AM as an AR glass microfibre intended in particular for flooring, proposed as a replacement for the mesh placed in the upper third of the slab under the conditions verified by the design. The strands are composed of 100 filaments with a diameter of 13.5 µm and a cut length of 13 mm, with H950 bonding treatment.

Laying of concrete flooring with concrete mixer and workers
Concrete laying: example published by the partner on the page dedicated to V12-AM.

Among the fields of use reported in the catalogue are car parks, warehouses, pedestrian areas, cycle paths, industrial flooring, ramps and courtyards. The brochure also mentions prefabrication and shotcrete: suitability and dosage must be defined for the specific application.

Fibratec presents the distribution in the matrix, the control of micro-cracking, and the finish without visible fibres as advantages of the product correctly used. The replacement of the mesh, when technically permitted, can also avoid the operations of cutting, overlapping, and positioning the mesh itself.

Learn more about V12-AM on the Fibratec Italia website.

Indicative dosages of V12-AM

  • Pedestrian flooring: the brochure reports 1 kg/m³.
  • Car parks for light vehicles: the brochure reports 2 kg/m³.
  • Industrial flooring and greater loads: require a technical evaluation. The partner's website presents dosages in the range of 1–3 kg/m³ for solutions found to be feasible with V12-AM, not as a universal prescription.

For example, at a dosage already defined as 2 kg/m³, for 5 m³ of concrete, 10 kg of fibres are required. This multiplication determines the quantity to be supplied, not the load-bearing capacity of the flooring.

Mixing of V12-AM

The website indicates adding the fibre as the last component, with an introduction rate of 3 kg/minute, and continuing mixing for another minute after complete addition. The brochure also reports the introduction limit of 3 kg/minute.

The rotation speed must be confirmed with the partner: the brochure indicates at least 15 rpm, while the webpage speaks of a maximum of 15 rpm. Do not use this discrepancy as an operating instruction; request the updated procedure for the equipment used. The brochure also indicates not to prolong mixing beyond 25 minutes.

Characteristics and packaging

The catalogue declares for V12-AM a fibre tensile strength of 1,620 MPa and a density of 2.68 g/cm³. The strength of the fibre does not equal the strength of the fibre-reinforced concrete nor does it constitute a verification of the slab.

Water-soluble 1 kg bags in boxes of 10 units are reported, with pallets of 360 kg. ; the packaging section of the website indicates 16 kg bags and pallets of 768 kg. 

Fibratec V13-MO for mortars, plasters and coatings

V13-MO is intended, according to the partner, for mortars, single-layer plasters, coatings, facade paints, self-levelling mortars, chlorinated rubber, and other compatible matrices. The technical page describes it as a fibre with loose filaments of 13.5 µm, cut to 13 mm, unlike the strands described for V12-AM.

Single-layer mortar sample with visible fibres in the section, presented by Fibratec for V13-MO
Single-layer mortar sample with V13-MO fibres, presented by the partner to illustrate the distribution in the matrix. Image source: Fibratec Italia.

The distribution in the mix is proposed to create a continuous reinforcement in the volume and contribute to the control of micro-cracking. The partner also presents it for the replacement of certain plaster meshes: suitability must be evaluated in the application system, without automatically eliminating local reinforcements or prescribed details.

Consult the Fibratec V13-MO page for walls and sand-free mixtures.

Indicative dosages of V13-MO

  • Single-layer: 200 g per 4 bags of 25 kg, i.e. 200 g per 100 kg of product.
  • Cement mortar for plaster: 200 g per 25 kg bag of cement. The reference is to cement, not to 25 kg of finished mortar.
  • Paints, chlorinated rubber and slurry: from 1 to 5 g per litre of material, checking consistency and compatibility.
  • Self-levelling mortar: 200 g per 500 kg of dry mortar.
  • Microcement base: 200 g per 200 kg of dry base.

The calculation bases are different: do not transfer the dosage of one formulation to another. For premixes, check with the manufacturer before modifying their composition.

Mixing and packaging of V13-MO

The website indicates addition as the last component, in a concrete mixer or with a mixer, until homogeneous distribution. The brochure indicates introduction into the fresh mortar and rapid mixing, up to a maximum of 3 minutes; for large-capacity mixers, it reports an introduction of 3 kg/minute and another minute after complete addition. Verify the updated procedure for the material and equipment used.

The catalogue reports 200 g bags, in boxes of 40 bags for a total of 8 kg, and 20 kg bags with pallets of 800 kg.

Fibratec V6 for fine finishes

The brochure describes V6 as a fibre with the characteristics of V12-AM but with a cut length of 6 mm, composed of 100 filaments of 13.5 µm and with H950 treatment. It is indicated for sand-free mortars and concrete, in particular in processes requiring fine and precise finishes, also in prefabrication.

The 16 kg format indicated for supply must be confirmed at the quotation stage: the attached brochure reports for V6 bags of 20 kg and pallets of 800 kg.

The brochure does not specify the dosage of V6. Request the relative technical data sheet, without automatically applying the dosages of V12-AM or V13-MO.

Microfibres, macrofibres and mesh replacement

The Fibratec website distinguishes the widespread control of micro-cracking from the post-cracking reinforcement function required in certain flooring. In the path proposed by the partner, V12-AM is evaluated in relation to the loads and the slab configuration; when post-cracking contribution is required, it is considered a specially dimensioned reinforcement solution.

It is not enough to choose a longer fibre or increase the dosage to automatically obtain structural reinforcement. Documented performance and verifications relevant to the design are necessary.

The same partner warns not to indiscriminately replace metal reinforcements in elements with structural requirements, such as beams, columns, and load-bearing walls. The eventual replacement of a mesh must be verified by the designer or the responsible technician, considering loads, support, thickness, joints, and the function of the reinforcement.

Partner path to choose the fibre · In-depth on structural reinforcement.

Declared performance and test documentation

For V12-AM, the website declares an increase in the first bending failure strength of 5–20% with dosages of 1–3 kg/m³. It also reports results attributed to tests by the University of Birmingham: reduction of carbonation by 47%, water penetration by 58%, and capillary absorption by 38%. These are values reported by the partner, not guaranteed results for every formulation or construction site.

The entry on air penetration appears incomplete in the consulted sources and is not transformed here into a percentage figure. To use the performance in a specification, request the complete test reports, with dosage, formulation, test conditions, and product references.

The partner specifies that real conditions may differ from laboratory conditions and that the final quality of a flooring depends also on production, laying, and curing. The performance of the fibre alone does not constitute a guarantee of the result of the work.

Fibratec Italia technical links

To directly deepen the partner's information, these references are available:

The links to the other product families are in-depth references and do not automatically indicate their availability in the range distributed by Pigment Al.

The Fibratec partner in the CONPAVIPER company list

Our Fibratec partner is present in the CONPAVIPER company list under the name Effective Business Development, in the category of suppliers of fibres and reinforcements for concrete. 

Consult the Effective Business Development sheet on the CONPAVIPER website.

Construction site reference in Bari

Entrance of the Caserma Briscese in Bari, with perimeter building and gate
V12 Used on the Caserma Briscese Flooring Construction Site, heavy military vehicle traffic
(BARI 2025) 

Fibratec supply through the agent network 

Pigment Al distributes Fibratec fibres with a network of agents.
For a targeted request, communicate the type of process, the material to be reinforced, the quantity to be prepared, and the required performance. For flooring, the intended use, loads, thickness, support characteristics, and designer indications are also useful.

This data helps define the documentation request and the supply quotation.
The definitive dosage, eventual mesh replacement, and executive details must be confirmed by the technicians responsible for the intervention.

For information on the agent network and commercial references, write to us at info@pigmental.it, indicating your area and the type of application.

Consult and download the Fibratec V12-AM, V13-MO and V6 catalogue (PDF).

Sources: Fibratec V12-AM, V13-MO and V6 brochure provided for this guide and Fibratec Italia public pages consulted on November 8, 2026. Verify the updated technical documentation before use.

Supply of FIBRATEC glass fibres

For commercial information, catalogue, and supply quotation request, consult the FIBRATEC glass fibres product sheet.