What is ethylene glycol?
Ethylene glycol (MEG, monoethylene glycol, ethane-1,2-diol, HOCH₂CH₂OH) is the simplest aliphatic glycol: a colorless, viscous, hygroscopic liquid, completely miscible with water and alcohols. It is industrially produced by the hydration of ethylene oxide. Its most widely exploited property is its ability to lower the freezing point of water depending on its concentration, making it the standard antifreeze fluid in the automotive industry, cooling systems, and HVAC circuits.

Physicochemical properties
- Formula: HOCH₂CH₂OH (C₂H₆O₂)
- Boiling point: 197°C
- Freezing point (pure): −13°C
- Freezing point of 50% v/v solution: −37°C
- Density: 1.113 g/cm³ at 20°C
- Viscosity: 16.1 mPa·s at 25°C
- Solubility in water: miscible in all proportions
- Flash point: 111°C (non-flammable under normal conditions)
- ADR classification: non-hazardous for transport
Freezing point depression as a function of concentration
- 20% v/v: −10°C
- 33% v/v: −20°C
- 40% v/v: −28°C
- 50% v/v: −37°C
- 60% v/v: −52°C (eutectic)
Main applications
Antifreeze and heat transfer fluid for motor vehicles
Ethylene glycol at 33–50% in water (with an anti-corrosion inhibitor package) is the standard coolant for internal combustion engine cooling circuits. It protects against freezing, boiling, and the corrosion of metals (aluminum, cast iron, copper, brass) present in the circuit.
Heat transfer fluids for HVAC and solar thermal systems
Used as a heat transfer fluid in underfloor heating circuits, solar thermal panels, and industrial chillers, in concentrations calibrated to the system's minimum temperature. Ethylene glycol has better thermal conductivity than propylene glycol but is toxic: it is not suitable for systems in contact with potable or food-grade water.
Co-solvent and coalescent in water-based paints
Ethylene glycol at 1–5% in water-based paints and coatings serves two functions: co-solvent (improves the dissolution of acrylic, vinyl, and styrene binders) and coalescent (lowers the minimum film formation temperature, MFFT, allowing application at lower temperatures). It extends the working time (open time) and reduces the risk of defects caused by rapid drying.
Production of PET and polyester fibers
MEG is the raw material for the synthesis of polyethylene terephthalate (PET), together with terephthalic acid (TPA). PET is used for bottles, packaging, and textile fibers (polyester). Over 60% of global MEG production is destined for this use.
Pharmaceutical and cosmetic industries
As an excipient in injectable solutions and as a humectant in cosmetics (note: toxicity upon ingestion limits its use in consumer cosmetics in favor of propylene glycol).
Ethylene glycol vs propylene glycol: which one to choose?
- Ethylene glycol (MEG): better thermal performance, more affordable, toxic upon ingestion — only for closed industrial and automotive circuits
- Propylene glycol (MPG): practically non-toxic (GRAS FDA), suitable for food-grade systems, domestic solar thermal, and residential HVAC — slightly lower thermal performance
Availability and formats
Available in 25 kg drums, 200 kg containers, and 1000 kg IBCs. Pallet delivery for large quantities.
Frequently Asked Questions
What is ethylene glycol and what is it used for?
Ethylene glycol (MEG) is an organic diol used mainly as antifreeze in automotive and industrial cooling circuits, as a heat transfer fluid in HVAC and solar thermal systems, and as a co-solvent/coalescent in water-based paints.
At what concentration should ethylene glycol be used as antifreeze?
33% v/v for protection down to −20°C; 40% v/v down to −28°C; 50% v/v down to −37°C. Concentrations above 60% reduce effectiveness due to the inversion of the eutectic curve.
Is ethylene glycol toxic?
Yes, ethylene glycol is toxic upon ingestion (oral LD50 in rats: 4700 mg/kg), but has low dermal toxicity. It is not suitable for systems in contact with potable or food-grade water: in those cases, use food-grade propylene glycol.