The black shock-absorbing flooring granule described in this data sheet is an SBR granule obtained by mechanical crushing of end-of-life tires (ELTs), with a particle size between 2 and 4 mm. It is a raw material to be evaluated within a flooring system: the granule data sheet alone does not certify the shock-absorbing performance of the finished flooring.
In brief: black SBR granule 2–4 mm
| Characteristic | Data reported in the data sheet |
|---|---|
| Material | SBR granule from mechanical crushing of ELTs |
| Color | Black |
| Particle size | 2–4 mm |
| Physical state | Solid elastomer |
| Bulk density | 0.49 kg/dm³, equivalent to approximately 490 kg/m³ |
| Water solubility | Insoluble |
What is black SBR granule?
It is a granular rubber material obtained from the recovery of end-of-life tires. The provided data sheet indicates a particle size of 2–4 mm and lists several uses, including components for indoor and outdoor flooring and infrastructure for playground equipment and play structures.
The choice of granule must be linked to the flooring design, compatibility with the binder, and the technical documentation of the adopted system. The material should not be confused with ready-to-use flooring.
Use in shock-absorbing flooring
To evaluate black SBR granule in shock-absorbing flooring, the complete layering must be considered, not just the particle size of the rubber. Thickness, binder, subbase, installation method, and conditions of use must be defined by the designer and the system supplier.
The attached data sheet does not indicate binder dosages, consumption per square meter, installation thicknesses, curing times, or impact attenuation test results. It is therefore incorrect to derive an allowable fall height or guaranteed shock-absorbing performance from this data.
Technical data sheet of black SBR granule
The following table transcribes the values present in the provided document. The indications "not applicable" and "not easily applicable" are maintained as reported in the original data sheet.
| Parameter | Declared value |
|---|---|
| Physical state | Solid elastomer |
| Color | Black |
| pH | 7.3–7.9 |
| Melting point | Not applicable |
| Boiling point | Not applicable |
| Flash point | Not easily applicable |
| Liposolubility | Insoluble |
| Auto-ignition | 370 °C |
| Bulk density | 0.49 kg/dm³ |
| Water solubility | Insoluble |
| Viscosity | Not applicable |
The auto-ignition data does not represent a fire reaction classification of the finished flooring. The pH measurement method is not specified in the provided document.
How to read bulk density
The bulk density of 0.49 kg/dm³ corresponds to approximately 490 kg/m³. For simple conversion, an apparent volume of 100 liters is equivalent to approximately 49 kg of material under the conditions of the declared data. It is not an installation consumption: the actual requirement must be determined for the chosen mixture and layering, taking compaction into account.
Other reported fields of application
The data sheet mentions additives for asphalt, fillers for artificial grass coverings for sports fields, components for playground equipment and play structures, indoor and outdoor flooring, products for floriculture and construction, tramway and port infrastructure, civil engineering, and acoustic insulation panels. These are areas mentioned in the document, not certifications of suitability for any use.
Documentation to request before installation
Before using the material, request the updated product and system documentation: granule and binder specifications, installation instructions, substrate characteristics, and test results relevant to the intended use. The photographed data sheet contains dated regulatory references: it is not used here to certify the current classification of the material or the compliance of the flooring.
Frequently asked questions about black granule for shock-absorbing flooring
What is the particle size of black SBR granule?
The provided technical data sheet indicates a particle size between 2 and 4 mm.
Where does the material come from?
The granule is obtained by mechanical crushing of end-of-life tires, indicated by the acronym ELT.
How much does a cubic meter of granule weigh?
The declared bulk density is 0.49 kg/dm³, equivalent to approximately 490 kg/m³. The actual weight depends on the filling and compaction conditions.
Does the granule alone guarantee shock-absorbing flooring?
No. The performance must be evaluated on the complete flooring system. The granule data sheet does not report impact attenuation tests or an allowable fall height.
How much binder should be used?
The provided document does not indicate a dosage. The instructions of the binder and system supplier must be followed, without deriving a percentage from the particle size alone.
To evaluate a supply of black SBR granule, communicate the intended use, surface area, and planned layering to Pigment Al, so that the technical data to be further investigated can be identified.