Delaying Lacquer

RETARDING LACCA 

the RETARDING LACCA is a ready-to-use surface retarder for the production of washed concrete products and panels. Applied by roller to the formwork before casting, it delays the surface curing of the concrete, allowing the aggregates to be washed after stripping. Consumption: 80–125 g/m². Stripping and washing after 24–72 hours.

WB-LACK Retarding Lacca for Washed Concrete and Precast Panels

Technical Specifications

Parameter Value
Type Ready-to-use Retarding Lacca
Application By roller, evenly
Consumption 80–125 g/m²
Drying time 15–30 minutes before casting
Stripping and washing 24–72 hours after casting
Packaging 20 kg pail
Shelf life 12 months from the date of supply
Storage Cool, well-ventilated place; frost-resistant

Retarding Lacca Types: Color (Non-Indicative), Particle Size, and Washing Depth

Type Color Particle Size (mm) Washing Depth (mm)
01 Blue 1–3 0.5
02 Brown 3–5 1.0
10 Green 3–5 1.5
25 Yellow 4–8 2.0
50 Red 5–8 2.5
80 Gray 8–12 3.0
100 Ochre 8–16 3.5
130 White 12–16 4.0
200 Orange 16–18 5.0
300 Purple 18–32 6.0

Washing depth must be verified with preliminary tests: the result also depends on the cement, mix, vibration, and curing conditions, as indicated in the FAQs.

Application Instructions

  1. Shake well with a drill and mixer before each application.
  2. Apply by roller evenly and sparingly to the formwork.
  3. Allow 15–30 minutes to dry before casting.
  4. Cast the concrete carefully, avoiding to smear the mix on the vertical surfaces.
  5. Strip and wash after 24–72 hours (use the same cycles for all products in the same series).

As used by the best Italian precast manufacturers: watch the video

FAQ — Frequently Asked Questions

What is Retarding Lacca and what is it used for?

Retarding Lacca is a surface retarder applied to the formwork before casting. It delays the curing of the concrete surface, allowing the aggregates to be washed after stripping and producing a washed concrete effect.

What is the consumption rate of Retarding Lacca?

80–125 g/m², applied evenly by roller. Consumption is lower than that of competing products and lasts longer over time.

How long after casting can the concrete be washed?

Usually after 24 hours from casting, but also after 48 or 72 hours. The cycles must be the same for all products in the same production series to ensure uniform results.

Is Retarding Lacca compatible with all types of formwork?

Yes, it can be used on all types of formwork. Any residue on the formwork can be easily removed with a brush or with a standard thinner.

Is the washing depth always the same?

No. The depth depends on the type and dosage of cement, aggregate particle size, mix consistency, vibration, and curing conditions. Preliminary tests are always recommended for each type of production.