Lime milk is an aqueous suspension of calcium hydroxide particles (Ca(OH)₂). It is prepared by dispersing hydrated lime in water and is distinguished from limewater, which is clear and contains only the dissolved fraction. It is used in some construction processes, wall treatments, and pH correction processes; the concentration and method of use must be chosen based on the application and the technical data sheet.

What is lime milk?
Lime milk is a dispersion of solid calcium hydroxide particles in water. Its white and cloudy appearance is due to the presence of suspended particles. It can be produced by dispersing hydrated lime in water; the slaking of quicklime, however, is a highly exothermic reaction and should not be attempted without proper preparation.
Differences between quicklime, hydrated lime, lime milk, and limewater
| Material | Composition | Appearance | Characteristic |
|---|---|---|---|
| Quicklime | Calcium oxide (CaO) | Solid | Reacts with water, releasing heat |
| Hydrated lime | Calcium hydroxide [Ca(OH)₂] | Powder | Raw material for suspensions and mortars |
| Lime milk | Ca(OH)₂ dispersed in water | Cloudy white liquid | Contains suspended solid particles |
| Limewater | Soluble fraction of Ca(OH)₂ in water | Clear liquid | Does not contain the same amount of suspended solids as lime milk |
Properties and behavior
Lime milk is alkaline. Its performance depends on the amount of solids, the purity and fineness of the lime, the quality of the water, and the stability of the suspension. Upon contact with carbon dioxide in the air, the calcium hydroxide gradually carbonates, forming calcium carbonate. The particles may settle during storage, so adequate agitation may be required before dosing.
How lime milk is prepared
For a controlled preparation, hydrated lime is gradually dispersed in water, with agitation and equipment compatible with an alkaline substance. Gradual addition helps wet the particles and limit the formation of lumps. The concentration is not universal: it must be defined according to the process and verified with product testing.
- Define the amount of water and the concentration required for the application.
- Start agitation in a compatible container and follow the instructions on the safety data sheet.
- Slowly add the hydrated lime, avoiding the dispersion of dust.
- Mix until a uniform suspension is obtained and check the density, pH, and sedimentation according to the specified method.
- Validate the suspension in the final application before using it on a larger scale.
Warning: do not attempt to slake quicklime without proper preparation. The reaction with water releases a lot of heat and can cause splashes and burns; it must be handled only with appropriate procedures, equipment, and expertise.
Concentration and dosing
There is no dosing that is suitable for every use. It is necessary to distinguish the percentage of hydrated lime from the percentage of solids in the commercial suspension: two products with the same mass may provide different amounts of Ca(OH)₂. In water treatments, the dosage must be determined with tests on the actual system and monitoring of process parameters; in construction processes, it must be evaluated based on the substrate, finish, and application conditions.
| Parameter | Why it matters | Control to evaluate |
|---|---|---|
| Total solids | Indicate the actual amount of calcium hydroxide | Data from the technical data sheet or analysis |
| Density | Helps control consistency between batches | Measurement at a defined temperature |
| Particle size | Influences reactivity, sedimentation, and pumpability | Particle size distribution |
| pH | Indicates alkalinity, but does not replace the strength | Measurement with a compatible method and instrument |
| Viscosity | Affects mixing, dosing, and application | Controlled method and temperature |
Main uses
Paints and wall treatments
It is used in some lime-based mineral paints and finishes. The result depends on the substrate, absorption, primer preparation, concentration, and environmental conditions; not all coatings are compatible.
Mortars, plasters, and restoration
It can be used in lime-based processes compatible with the substrate. In restoration work, the characteristics of the masonry, the presence of salts and moisture, and compatibility with existing layers must be considered.
Water treatment and industrial processes
Its alkalinity can be utilized in pH correction processes and other industrial treatments. The dose and addition rate depend on the composition of the system; an excess can cause the pH to exceed the required value or increase deposits.
Agricultural applications
For use on crops or in agriculture, only products authorized for that purpose must be used, and the label and applicable regulations must be followed. Suitability cannot be inferred from chemical composition alone.
Stability, storage, and safety
The suspension may settle. Concentration, particle size, agitation, and storage conditions affect redispersibility; any stabilizers must be checked for compatibility with the application. Calcium hydroxide is alkaline and can cause irritation or injury, especially to the eyes: consult the safety data sheet, limit dust and aerosols, and use the indicated protective equipment.
- Protect the eyes and skin from splashes.
- Ensure adequate ventilation.
- Do not mix with acids without a controlled procedure.
- Manage residues and wash water according to applicable regulations.
How to choose the product
Before purchasing or using, compare the Ca(OH)₂ strength, purity, insoluble fraction, particle size, density, viscosity, reactivity, and storage conditions. For continuous systems, pumpability, stability, and compatibility with pipes and seals are also important. The technical data sheet and safety data sheet for the chosen grade remain the references for use.
Frequently asked questions about lime milk
Is lime milk the same as hydrated lime?
No. Hydrated lime is calcium hydroxide powder; lime milk is a suspension of this compound in water.
What is the difference between lime milk and limewater?
Lime milk is cloudy because it contains suspended solid particles. Limewater is clear and contains the fraction of calcium hydroxide dissolved in water.
How is lime milk prepared?
Generally, hydrated lime is gradually dispersed in water with agitation, following safety instructions and the technical data sheet. Concentration and procedure depend on the application.
Is there a universal dosage?
No. The dosage depends on the concentration, process, and required result. It must be defined using the technical data sheet and tests on the actual system, monitoring the relevant parameters.
Can it be prepared starting from quicklime?
The reaction of quicklime with water releases a lot of heat and can cause splashes and burns. Slaking should not be attempted without proper preparation; for controlled preparations, it is preferable to follow professional procedures and consider using pre-hydrated lime.
How long does lime milk last?
Shelf life depends on concentration, purity, contamination, container, and storage. The suspension may settle and gradually react with carbon dioxide; the manufacturer's data and product testing are authoritative.
Can it be applied to any wall?
No. Before application, compatibility, absorption, cleanliness, and substrate stability must be checked, as well as the product instructions and the finishing system.