Brown Iron Oxide

What is Brown Iron Oxide?

Brown iron oxide is a synthetic inorganic pigment obtained from calibrated mixtures of red iron oxide Fe₂O₃, black iron oxide Fe₃O₄ and, in some grades, yellow iron oxide FeOOH. It produces shades from hazel to cocoa, from burnt sienna to raw umber.

In short: brown iron oxide can be used to achieve earthy tones in concrete and mortars. The final color depends on the pigment grade, dosage, cement, aggregates and curing. The dosage must be defined in the technical data sheet and tested with the actual mixture; for cementitious materials, a grade with documented EN 12878 compliance must be selected.

Chemical and Physical Properties

Parameter Indicative value
Composition Mixture of Fe₂O₃ + Fe₃O₄, possibly with FeOOH
Thermal stability Depends on the grade composition
Alkali resistance Suitable for cementitious systems in specific grades
Light resistance High in outdoor grades
Water solubility Insoluble
Compliance Check EN 12878, REACH and product documentation

Shades and Dosages for Concrete

There is no universal correspondence between the percentage of brown oxide and the final color. To choose the dosage, the technical data sheet of the grade must be followed and samples made with the same materials and under the same production conditions must be compared.

Factor What to check in the color test
Pigment grade and shade Compare the available grades: names such as hazel, tobacco, cocoa or raw umber describe color families, not a guaranteed color.
Dosage Test the quantities specified in the technical data sheet, stating the calculation basis and keeping it constant between samples.
Cement and aggregates Use the same materials as the production: the color of the cement and aggregates influences the result.
Water, finish and curing Maintain comparable conditions and evaluate the samples after drying and curing.
RAL reference Use it only as a comparison reference; correspondence must be verified on the final sample, not deduced from the dosage.

With white cement, warmer and cleaner tones are generally obtained; with gray cement, the result appears darker and earthier. Consult Pigment Al brown iron oxide.

Main Applications

Concrete and cement mortars

Define the dosage in the technical data sheet of the grade. Pre-mix dry with cement and aggregates before adding water and check the color and performance on the actual mixture.

Lime-based plasters and mortars

Define the dosage in the grade documentation and verify it with tests based on lime, substrate and finish, indicating the reference dry weight.

Paints and decorative paints

Pre-disperse with a wetting and dispersing system compatible with the pigment and binder.

Ceramics and clay products

The chromatic behavior depends on the composition of the brown, the temperature and the firing atmosphere.

Colored asphalt

It can be used for earthy tones, after verifying thermal stability, dispersion and compatibility with the process.

Brown Iron Oxide and Natural Earths

Characteristic Synthetic brown oxide Natural earth
Composition Controlled according to the grade Variable depending on the deposit
Color consistency Generally high Can vary between batches
Coloring power Generally higher Generally more moderate
EN 12878 Available in compliant grades To be verified on the product
Use in cement Yes, by choosing a suitable grade Possible after verification

How to Use

  • Concrete and mortars: add dry to cement and aggregates, then mix until uniform.
  • Water-based paints: pre-disperse before incorporating into the binder.
  • Ceramics: check the shade and stability with a firing test.
  • Lime plasters: evaluate the color after complete drying and curing.

Compliance and Safety

  • EN 12878: check the certificate of the grade intended for cement and lime.
  • REACH and CLP: refer to the SDS of the specific product.
  • Food use E172: should not be assumed; it requires a specifically certified grade.
  • Storage: respect the duration and conditions indicated by the manufacturer, keeping the product dry and in its original packaging.

Related In-Depth Information

FAQ on Brown Iron Oxide

Is brown iron oxide stable in cement?

Grades intended for construction are formulated for the alkaline environment of cement. The EN 12878 compliance of the specific product must be verified.

What is the difference compared to natural raw umber?

The synthetic offers greater control over composition and color consistency; natural earth can vary depending on origin and batch.

How much brown oxide is needed for concrete?

The dosage depends on the pigment grade, the materials and the required shade. Follow the technical data sheet, specify the calculation basis and check the color and performance with samples of the actual mixture. There is no universal percentage associated with a RAL color.

Is brown iron oxide toxic?

The classification depends on composition, grade and impurities. Consult the SDS and use the PPE indicated for exposure to dust.

Can it be used in ceramics?

Yes, but the shade and stability must be verified with the specific grade under actual firing conditions.

Does brown iron oxide expire?

The storage life and conditions indicated by the manufacturer must be respected. Store in its original packaging and in a dry place.

Rough brown surface next to a light band