What are P Esasil products?
P Esasil is the name used in this guide to present a range of water-repellent treatments and additives with different uses in construction and paints. The choice depends on the material to be treated and the type of use: a sealer to be applied to the substrate should not be considered interchangeable with an additive to be incorporated into a formulation.
The following overview summarizes the indicative uses communicated for the standard, 100, 200, 250, 600 and 301P variants. The identity of the proposed grade, availability, method of use and correspondence of the documentation must be confirmed before supply.
Main variants and uses
| Reference variant | Indicative use | Check before use |
|---|---|---|
| Standard P Esasil / solvent-based | Transparent silicone sealer for walls, floors, cellar surfaces and stones | Suitability of the substrate, application conditions and aesthetic result |
| P Esasil 100 | Water-repellent treatment of absorbent surfaces: concrete, fiber cement, bricks, natural or artificial stones and plasters | Absorption and compatibility with the specific material |
| P Esasil 200 | Water-repellent protection of facades and porous materials; possible use as an anti-foaming additive in water-based architectural paints | Confirm the grade and the distinct use, surface or formulation |
| P Esasil 250 | Water-repellent protection of stones, roof tiles, tiles, plaster and ceramic products | Porosity, finish and any existing treatments |
| P Esasil 600 | Additive for pearlescent effect in plasters and water-based paints | Compatibility with the formulation, dosage and incorporation |
| P Esasil 301P | Water-repellent use in construction | Permitted applications and operating conditions in the grade documentation |
The codes identify references within the range, not a scale of effectiveness. Do not infer composition, concentration, yield or dilution method from the variant number alone.
Standard P Esasil: transparent silicone sealer
The standard variant is described as a solvent-based transparent silicone sealer for the protection of substrates such as walls, floors and stones, including cellar surfaces when suitable for treatment.
To preserve the natural appearance of the material, perform a test on a small, inconspicuous area and evaluate it after drying. The transparency of the product should not be interpreted as a guarantee of the absence of color variations on any substrate.
P Esasil 100: absorbent mineral surfaces
The 100 variant is indicated in the overview for concrete, fiber cement, bricks, natural or artificial stones and absorbent plasters. Before choosing, check the condition of the surface, the absorption and the presence of coatings that could prevent treatment.
P Esasil 200: facades and water-based formulations
Two areas are indicated for the 200 variant: water-repellent protection of facades and porous materials, and formulation use as an additive/anti-foaming agent for water-based architectural paints.
It is necessary to confirm which use is intended for the product actually supplied. Do not transfer dosages, dilutions or application methods from a surface treatment to a paint additive.
P Esasil 250: stones, roof tiles, tiles and plaster
The 250 variant is proposed for the water-repellent protection of stones, roof tiles, tiles, plaster and ceramic products. The list of materials does not replace a test: absorption, finish and pre-existing treatments must be evaluated on the actual substrate.
P Esasil 600: pearlescent effect in paints and plasters
The 600 variant is described as an additive intended to give a pearlescent effect to plasters and water-based paints. Dosage, order of addition and compatibility must be defined on the complete formulation.
The visible pearlescent effect does not demonstrate, on its own, all the protection performance of the coating. To evaluate the system, tests consistent with the intended use are required.
P Esasil 301P: check the grade before application
For the 301P variant, only the general indication of a water-repellent product for construction is available here. Before specifying substrates, consumption or application procedure, request the technical and safety documentation referring to the supplied grade.
How to choose the treatment
- Identify the substrate: concrete, plaster, brick, stone, plaster or ceramic, specifying its finish and state of preservation.
- Define the objective: surface treatment, pearlescent effect in the coating or formulation function in a paint.
- Indicate the operating conditions: indoor or outdoor, exposure to water, traffic and any previous treatments.
- Confirm the grade: request the method of use, yield, possible dilution and application conditions of the proposed product.
- Perform a test: evaluate compatibility, appearance and performance on the actual material or in the actual formulation.
Do not choose a treatment for cellars or walls solely based on the term “water-repellent”: first, the cause of the moisture must be identified. Do not automatically attribute to a sealer the ability to resolve infiltrations, cracks or rising damp.
Application, consumption and safety
There is no single procedure valid for all variants in this overview. Quantity, number of coats, equipment, dilution, drying times and environmental conditions must be defined for the chosen grade.
For the solvent variants, carefully check the safety requirements and conditions of use. For each product, consult the relevant safety data sheet before handling. Do not assume that all grades have the same classification.
Frequently asked questions
Is P Esasil a single product?
No. The guide distinguishes variants with different uses. It is necessary to identify the grade and the corresponding documentation before use.
Which variant should be evaluated for absorbent bricks and concrete?
The 100 variant is indicated in the overview for these substrates. The choice must be confirmed based on the actual material, finish and absorption.
Which variant is indicated for the pearlescent effect?
The 600 variant is described as an additive for a pearlescent effect in water-based paints and plasters, to be checked in the complete formulation.
Does the treatment change the color of the stone?
The standard variant is described as transparent and intended to preserve the natural appearance. However, check the result with a local test and evaluate it after drying.
Can the same dosage be used for all variants?
No. Surface sealers and formulation additives have different methods of use. Request the parameters of the specific grade.
Request information on P Esasil
Contact Pigment Al indicating the material, the surface to be treated, exposure conditions and the desired result. For uses in paints and plasters, specify the type of formulation and the desired function. This way, it will be possible to evaluate the variant and request the relevant technical information.