What is perchloroethylene?
Perchloroethylene (PCE, tetrachloroethylene, Cl₂C=CCl₂) is a non-flammable chlorinated solvent, a colorless liquid with a characteristic sweet odor. For decades, it was the standard solvent for dry cleaning and industrial metal degreasing, thanks to its excellent ability to dissolve oils, greases, and organic dirt without fire hazards. Since the 2000s, its classification as a substance of very high concern (SVHC) under the REACH regulation has led to increasingly stringent restrictions in Europe.

Physicochemical properties
- Formula: C₂Cl₄ (tetrachloroethylene)
- Synonyms: PCE, PERC, tetrachloroethylene, "perchloro"
- Density: 1.62 g/cm³ (heavier than water)
- Boiling point: 121°C
- Flammability: non-flammable (no flash point)
- Water solubility: low (150 mg/L at 25°C) — risk of groundwater contamination
- CLP classification: Carc. 2, Repr. 2, STOT RE 2 — suspected carcinogen
- REACH classification: SVHC (Substance of Very High Concern)
Main applications
Dry cleaning
PCE was the dominant solvent for dry cleaning for over 50 years, thanks to its effectiveness in removing grease, oil, and protein stains from delicate fabrics without damaging them. Modern machines (IV and V generation) use closed-loop systems with solvent recovery and activated carbon treatment to minimize emissions.
Industrial metal degreasing
Used in steam and cold degreasing baths to clean metal components before painting, plating, or assembly. Particularly effective for complex geometries where aqueous solvents cannot penetrate.
Chemical intermediate
Raw material for the production of HFC-134a (refrigerant) and other hydrofluorocarbons, replacing CFCs. Demand for this use is declining with the transition to HFOs.
REACH regulation and European restrictions
PCE is included in the SVHC list (Annex XIV REACH) and is subject to REACH authorization for industrial uses. The main restrictions currently in force in Europe:
- EU Reg. 2023/1542: ban on placing on the market for consumer dry cleaning (professional use permitted with authorization)
- Directive 1999/13/EC (VOC): emission limits for dry cleaning plants
- REACH authorization requirement for use as an industrial degreasing solvent (updated cutoff date)
Alternatives to perchloroethylene
- Hydrocarbon solvents (HCS): DF2000, Isopar — less effective, flammable
- Siloxane solvents (D5): GreenEarth — low toxicity but reduced effectiveness on grease stains
- Supercritical liquid CO₂: excellent effectiveness, high initial investment
- High-tech aqueous systems: Wetcleaning — for water-compatible fabrics
Frequently Asked Questions
What is perchloroethylene and why is it regulated?
Perchloroethylene (PCE, tetrachloroethylene) is a chlorinated solvent classified as an SVHC under REACH due to suspected carcinogenicity and reproductive toxicity. Its emissions contaminate indoor air and groundwater. European regulations progressively restrict its use and require REACH authorization for industrial uses.
Is perchloroethylene still legal in Europe?
Yes, but with increasing restrictions. Professional use in dry cleaning is still permitted with closed-loop machinery and REACH authorization. Consumer use is banned. Always check the updated regulations with your supplier or REACH consultant.
Is perchloroethylene flammable?
No, perchloroethylene has no flash point and is not classified as a flammable liquid. This was one of its main advantages over hydrocarbon solvents for industrial dry cleaning.