Blue pigments for construction: which one to choose?
The main blue pigments for construction are not equivalent. Cobalt blue, ultramarine blue, and Prussian blue differ in composition, alkaline and thermal stability, light resistance, and compatibility with cement, lime, paints, and ceramics.
In short: for concrete, mortars, and fresco, cobalt blue is often considered when alkaline stability and light resistance are required. Ultramarine blue may be suitable for some formulations, but it must be verified in the actual system. Prussian blue should not be considered a direct substitute in alkaline matrices.
Quick comparison
| Pigment | Composition | Strength | Limitation to verify |
|---|---|---|---|
| Cobalt blue | CoAl₂O₄, PB 28 | Alkaline, UV, and thermal stability | Suitability of the specific grade |
| Ultramarine blue | Sulfur-containing aluminosilicate, PB 29 | Bright shade | Chemical compatibility and acid resistance |
| Prussian blue | Ferric ferrocyanide, PB 27 | Deep shade | Stability in alkaline environments |
Cobalt blue for cement, lime, and ceramics
Cobalt blue is used when good light, alkali, and high-temperature stability is required. In concrete, it can be considered at approximately 0.5–5% by weight of cement, with the value determined through actual testing. Learn more about its properties and dosages in the technical guide to cobalt blue.
Ultramarine blue: advantages and limitations
Ultramarine blue is appreciated for its intense and bright shade. Before using it in cement, lime, or mineral paints, the technical data sheet, chemical resistance, and color stability must be verified with an application test.
Prussian blue in formulations
Prussian blue offers a deep shade, but its compatibility with alkaline matrices must be carefully verified. It may be used in compatible paint systems; for cement and lime, technical data and specific tests are required.
Choice based on application
| Application | Choice to consider | Necessary check |
|---|---|---|
| Concrete and precast products | Cobalt blue or an expressly suitable grade | EN 12878, alkalinity, and color test |
| Lime mortars and plasters | Pigment stable in the matrix | pH, compatibility, and curing |
| Fresco | Pigment documented for buon fresco | Stability in fresh lime |
| Paints and decorative paints | Choice based on the binder | Dispersion, light, and pH |
| Ceramics and glazes | Firing-resistant grade | Thermal cycle and glaze |
Indicative dosages
| Target | Initial reference | Note |
|---|---|---|
| Light shade | 0.5–1% | White cement promotes brighter colors |
| Medium shade | 1.5–2.5% | Consider aggregates and water/binder ratio |
| Intense shade | 3–5% | Beyond saturation, the benefit may decrease |
The values are formulation references, not universal specifications. Consult the technical data sheet and create a sample.
FAQ on blue pigments for construction
Which blue pigment can be used in cement?
Cobalt blue is a frequent choice thanks to its alkaline stability. Suitability and EN 12878 compliance must be verified for the specific grade.
Can ultramarine blue be used in concrete?
It depends on the grade and formulation. Technical documentation and a test in the actual matrix are required.
What is the difference between cobalt blue and Prussian blue?
The former is a cobalt aluminate; the latter is a ferric ferrocyanide. They have different stabilities and applications.
How much blue pigment is needed in concrete?
As an initial reference, 0.5–5% by weight of cement is often considered.
Are there blue iron oxides?
No. Common iron oxides produce yellow, red, black, and brown shades.
What precautions are needed?
Consult the SDS and use the protective equipment indicated for the specific product.
