What is polyaluminium chloride (PAC)?
Polyaluminium chloride, referred to by the acronym PAC, is a family of pre-hydrolyzed inorganic aluminum-based coagulants. It is used mainly in water treatment to destabilize colloidal particles and promote the formation of flocs that can be separated by sedimentation, flotation, or filtration.
PAC is available in various liquid or powder grades, with different Al₂O₃ content, basicity, density, and pH. Technical specifications and dosage must therefore be checked on the technical data sheet of the specific product.
How PAC works
Polyaluminium chloride promotes coagulation by neutralizing surface charges and, under certain conditions, trapping impurities in aluminum hydroxide precipitates. Its effectiveness depends on pH, alkalinity, temperature, turbidity, the nature of the pollutants, and mixing intensity.
Technical properties to consider
- Al₂O₃ content: varies depending on the commercial grade.
- Basicity: affects its behavior in water and its effect on pH.
- pH and density: must be checked on the product's technical data sheet.
- Physical form: liquid solution or powder.
- Storage: follow the temperature, compatible materials, and shelf life specified by the supplier.
Main applications
Drinking water treatment
PAC can be used in water clarification processes for water intended for human consumption only when the specific grade complies with regulatory requirements and applicable authorizations. The dosage must be established through testing and process controls.
Wastewater treatment
It is used to promote the removal of suspended solids, turbidity, color, and phosphorus. Performance varies depending on the composition of the wastewater and the plant's operating conditions.
Pulp and paper industry
In paper mills, it can help retain fibers and fillers, fix anionic substances, and manage process water. Its use should be evaluated within the complete additive system.
Dosage and jar test
There is no universal dosage. For an initial assessment, tests can be carried out at different treatment levels, measuring residual turbidity, color, pH, sludge volume, and settling velocity. The jar test allows for the comparison of dosages and mixing conditions before industrial-scale application.
The ranges provided in technical guides are only indicative: the actual dosage depends on the product's specifications and the quality of the water to be treated.
PAC and aluminum sulfate
Compared to aluminum sulfate, some PAC grades can operate effectively over a wider pH range, require less alkalinity correction, and produce flocs with different characteristics. However, the actual advantage must be verified on a case-by-case basis by comparing cost, dosage, treated water quality, and the amount of sludge produced.
Safety and handling
PAC is a product for professional use. Before use, consult the safety data sheet and the technical data sheet of the purchased grade, use the indicated personal protective equipment, and check the compatibility of storage and dosing materials. Do not automatically apply instructions for other aluminum salts to PAC.
Frequently asked questions
What is polyaluminium chloride used for?
It is mainly used as a coagulant in water treatment, where it promotes the aggregation of fine particles and their subsequent separation.
What is the dosage of PAC?
The dosage depends on the product, pH, and water composition. It must be determined through jar tests and monitored during the process.
What is the difference between PAC and aluminum sulfate?
PAC is pre-hydrolyzed and can offer operational advantages in certain water types. The choice requires an experimental comparison of dosage, pH, effectiveness, sludge, and overall cost.
Can PAC be used for drinking water?
Only if the specific grade complies with the requirements for such use and is used according to applicable regulations.