Anti-graffiti: Discover the Benefits and Professional Applications

What are anti-graffiti products?

Anti-graffiti products are chemical formulations that create a protective film on the surface, preventing spray paint, markers, and other vandalistic agents from adhering, making them easier to remove. They are divided into two main categories: sacrificial protectors (removed along with the graffiti during cleaning and requiring reapplication) and permanent protectors (which maintain their effectiveness after multiple cleaning cycles).

Types of anti-graffiti products

Type Mechanism Reapplication
Sacrificial Porous film removed with the graffiti After each removal
Permanent Hard film resistant to repeated washing Periodic (years)
Anti-graffiti remover Solvent/gel for removal without a protector Not applicable

P-GR 14: technical data sheet

P-GR 14 is a sacrificial anti-graffiti protector based on organic polymers in a water-based emulsion. It fills the pores of the surface without preventing breathability, creating an invisible film that protects against graffiti, oils, and water. It is suitable for: marble, natural stones, granite, exposed brick, concrete, concrete blocks, and decorative plasters resistant to hot pressure washing.

How to apply P-GR 14

  1. Preparation: surfaces must be clean, dry, and solid, and capable of withstanding pressure washer pressure and hot water temperature fluctuations.
  2. Temperature: apply between 10°C and 35°C.
  3. Application: spread with a roller, brush, or airless sprayer until the surface is saturated. Dosage: 50–300 g/m² depending on the porosity and roughness of the substrate.
  4. Second coat: if necessary, wait at least 30 days after the first application.
  5. Graffiti removal: use a pressure washer at low pressure with hot water at approximately 80°C. After cleaning, reapply P-GR 14.

Compatible surfaces

  • Marble and natural stones
  • Granite
  • Exposed brick
  • Concrete and concrete blocks
  • Wash-resistant decorative plasters

Difference between sacrificial and permanent protectors

The sacrificial protector (such as P-GR 14) is removed along with the graffiti during cleaning and must be reapplied after each treatment. The permanent protector creates a hard film that allows the graffiti to be removed without having to reapply the product, but it has a higher initial cost.

 

Anti-graffiti protector for stone and concrete surfaces