DIY Acryl-Siloxane Resin for Terracotta, Plaster and Cement
The acryl-siloxane resin is a water-repellent, breathable film-forming protector for terracotta, plaster, cement and other porous building materials. It combines the film-forming ability of the acrylic component with the water-repellency of siloxanes, helping to protect the substrate from water and weathering.
In short
- Suitable for terracotta, brick, plaster, cement, concrete and absorbent stones
- Reduces water absorption while maintaining the breathability of the substrate
- Consolidates porous surfaces and reduces dusting
- Also suitable for DIY applications on clean, dry and absorbent substrates
- Always requires a preliminary test to check absorption and the aesthetic result
Characteristics of the Acryl-Siloxane Resin
| Characteristic | Function |
|---|---|
| Water repellency | Reduces water penetration into the substrate |
| Breathability | Allows water vapour to pass through |
| Film-forming effect | Forms a surface protective layer |
| Consolidation | Reduces dusting on porous surfaces |
| Weather protection | Helps limit deterioration caused by exposure |
Which surfaces can it be applied to?
- Terracotta and brick
- Lime or cement plaster
- Cement and concrete
- Porous natural and artificial stone
- Absorbent mineral building materials
The product should not be considered universal: non-absorbent surfaces, those already treated or subject to rising damp require specific verification.
DIY Application
- Clean the substrate: remove dust, dirt, efflorescence and loose parts.
- Allow to dry: the surface must be dry and free from visible residual moisture.
- Perform a test: apply the product in an inconspicuous area to check absorption and any aesthetic changes.
- Apply evenly: avoid build-up, drips and variations in quantity between adjacent areas.
- Protect during drying: avoid rain, frost, dust and traffic until completely dry.
Consumption and the number of coats depend on the porosity of the substrate and the instructions of the specific formulation. In the absence of a technical data sheet with verified values, it is not correct to indicate a universal dosage.
Acryl-Siloxane Resin or Siloxane Water Repellent?
| Solution | Behaviour | When to consider it |
|---|---|---|
| Acryl-siloxane resin | Forms a surface protective film | When protection, consolidation and surface resistance are needed |
| Siloxane water repellent | Penetrates the substrate without forming a visible film | When maximum breathability and a natural appearance are priorities |
FAQ on Acryl-Siloxane Resin
What is acryl-siloxane resin?
It is a water-repellent and breathable protector that combines a film-forming acrylic component with the water-repellent properties of siloxanes.
Can it be applied as a DIY project?
Yes, on clean, dry, porous and absorbent surfaces. It is essential to first perform a test in an inconspicuous area and follow the technical data sheet of the formulation used.
What is the difference compared to a siloxane water repellent?
Acryl-siloxane resin forms a surface protective film. Siloxane water repellent penetrates the substrate more deeply and prioritises breathability and a natural appearance.
Which surfaces can it be applied to?
Terracotta, brick, plaster, cement, concrete, stone and other porous and absorbent building materials.
