Polymeric Sand: The Ideal Solution for Pavers

In short: polymer sand is a material used to fill the joints between paving stones and other paving elements. It contains sand and binders that, when properly wetted according to the product data sheet, help stabilize the joints. It does not replace the preparation of the subbase and should be chosen based on joint width, drainage, and installation conditions.

What is polymer sand and what is it used for?

Polymer sand is a mixture of fine sand and polymer binders used to seal the joints between paving stones, concrete pavers, and, if specified by the manufacturer, porphyry or natural stone. Compared to traditional sand, it can reduce material washout and limit weed growth in the joints, but the result depends on the product, installation, and maintenance.

Polymer sand or traditional sand?

Aspect Polymer sand Traditional sand
Stability in the joint The binder can reduce movement if properly activated May require replenishment after washout or traffic
Weeds Can limit growth, but not eliminate it entirely Does not create a bonded barrier in the joint
Permeability Depends on the formulation: check the technical data sheet Depends on particle size and installation system
Maintenance and cost Product and installation may cost more; maintenance is still necessary Initial cost is generally lower; joints may need replenishment

Polymer sand for paving stone joints

How do you apply polymer sand?

  1. Prepare: clean the joints and check that the paving and subbase are suitable for the chosen product. Follow the data sheet's instructions regarding joint width and depth.
  2. Distribute: pour the material onto the dry surface and brush it into the joints, without leaving residue on the pavers.
  3. Compact: if specified by the manufacturer's instructions, use the appropriate equipment and protection for the paving.
  4. Remove residue: carefully clean the surface before applying water to reduce the risk of stains.
  5. Activate: wet the joints following the quantity, method, and number of passes indicated in the technical data sheet; too much or too little water can compromise the result.
  6. Wait: respect the protection times against rain, foot traffic, and vehicle traffic specified by the manufacturer for the actual installation conditions.

Installation conditions and durability

Temperature, humidity, rain, and drainage affect application and curing. There is no temperature range or reopening time that applies to all polymer sands: always consult the data sheet for the grade used. Durability is also not guaranteed in years; it depends on the product, joint width, traffic, drainage, and maintenance. If a joint is damaged, check the manufacturer's instructions before replenishing it.

Frequently asked questions

What is polymer sand?

It is a mixture of sand and polymer binders used to fill paving joints. It is activated with water according to the instructions for the chosen product.

How does it differ from traditional sand?

The binder can make the material more stable in the joints and limit washout; performance and permeability depend on the product and installation.

How long does it need to dry?

Protection times against rain, foot traffic, and vehicle traffic vary depending on the formulation and environmental conditions. Refer to the technical data sheet of the product used.

Can it be applied to any paving?

No. Check compatibility with the paving material, joint dimensions, and drainage before installation.