Silane and Siloxane: Water-Repellent Impregnating Agent

Silane and siloxane: HP 629 water-repellent impregnating agent

In short: HP 629 is a solvent-free concentrated mixture of silane and siloxane. It is diluted with organic solvents to prepare water-repellent impregnating solutions for porous mineral substrates, even highly alkaline ones. It reduces water absorption without creating a surface film and maintains the substrate's water vapor permeability. It is not suitable for making plaster water-repellent.

HP 629 silane and siloxane concentrate for mineral substrates

How does a silane and siloxane-based impregnating agent work?

After application to the mineral material, HP 629 reacts with atmospheric moisture or the substrate's interstitial water. The active principle formed reduces water absorption. Pores and capillaries are not blocked by a surface film, so the substrate retains a high degree of water vapor permeability. The treatment offers good penetration, high alkali resistance, rapid development of water repellency, and a beading effect, without stickiness after drying.

Technical characteristics of the HP 629 concentrate

Parameter Indicated data
Appearance Transparent to light yellow liquid
Density Approximately 0.9 g/cm³
Active content Approximately 100%
Storage 12 months in originally closed containers
Storage temperature From 5 to 40 °C
Supply form Solvent-free concentrate, dilutable with organic solvents

Attention: “solvent-free” describes the supplied concentrate, not necessarily the solution ready for application after dilution. The dilution percentage is not specified in the data provided here: it must be determined according to the product's technical instructions and tests on the substrate.

Substrates and uses

The diluted solutions can be used as water-repellent impregnating agents or primers on absorbent and porous building materials. The indicated substrates include:

  • masonry and cement products;
  • clinker and limestone sandstone masonry;
  • fiber cement panels and mineral plasters;
  • natural and artificial mineral-based stones;
  • mineral paints, after checking compatibility.

HP 629 is also indicated as a primer for exterior paints. It is not suitable for making plaster water-repellent. The data sheet also indicates effectiveness on damp substrates: the actual conditions of application and the compatibility of the diluted solution must still be verified on the specific substrate. The reduction of surface water absorption is not equivalent to an intervention against capillary rise from the ground.

Dilution and application

The concentrate is dilutable with organic solvents. The available data do not indicate a universal dilution ratio or coverage in m²: do not use an arbitrary one. Before treating a large surface, check the product documentation for the compatible solvent, concentration, application methods, and safety precautions; perform a preliminary test on a small area, especially on decorated or damp substrates.

Frequently asked questions

Is HP 629 solvent-free?

The supplied concentrate is solvent-free. For use as an impregnating agent, diluted solutions in organic solvents are prepared.

On which substrates is it used?

It is indicated for absorbent and porous mineral materials, such as masonry, cement, clinker, fiber cement, mineral plasters, and mineral-based stones; it can also be considered as a primer for exterior paints.

Can it be used on plaster?

No, HP 629 is not suitable for making plaster water-repellent.

Does it create a film that blocks vapor?

No. The product reduces water absorption without forming a surface film or blocking pores and capillaries; the substrate retains a high degree of vapor permeability.

How much product is needed for dilution?

The data available here do not indicate a dilution percentage or universal coverage. Consult the product's technical instructions and test the solution on the actual substrate.