Caustic soda: differences between flakes, micropearls and liquid solution
Caustic soda, or sodium hydroxide (NaOH), is a strong base used in chemical processes, cleaning, water treatment and various industrial applications. It can be supplied in solid form, such as flakes or micropearls, or as an aqueous solution.
The choice does not depend solely on concentration: the dosing system, available equipment, process specifications and safe handling are also important. In this guide, we compare three products described in the available technical data sheets: caustic soda flakes with a minimum NaOH content of 98%, micropearls with total alkalinity expressed as NaOH of at least 99%, and a liquid solution referred to as 30%.
In short: flakes and micropearls are distinct solid forms, not synonyms for powder. The liquid solution eliminates the solid dissolution step, but its concentration must still be compatible with the process. No form is automatically better for every application.
Technical comparison: caustic soda flakes, micropearls and liquid
| Characteristic | Flakes | Micropearls | 30% Liquid |
|---|---|---|---|
| Supplier product code | SOD009000325 | SOD006000025 | SODA04315000 |
| Declared appearance | White or off-white hygroscopic flakes, which tend to stick together | Odorless white solid | Colorless or slightly opalescent liquid |
| Strength or alkalinity | Minimum 98% NaOH | Total alkalinity expressed as NaOH: minimum 990 g/kg, equivalent to 99% | Declared strength: 30.50% ± 1.50% |
| Sodium carbonate (Na₂CO₃) | Maximum 0.2% | Maximum 4 g/kg, equivalent to 0.4% | Not reported in the provided data sheet |
| Sodium chloride (NaCl) | Maximum 0.020% | Maximum 200 mg/kg, equivalent to 0.020% | Not reported in the provided data sheet |
| Specific gravity at 20 °C | Not reported in the provided data sheet | Not reported in the provided data sheet | 1.3290 ± 0.0100 kg/l |
| Data sheet revision | March 16, 2023, No. 00007 | April 3, 2025, No. 00013 | October 15, 2025, No. 00003 |
Minimum, maximum and tolerance values have different meanings: they are not all typical values or analytical results from a single batch. A parameter not reported in a data sheet should not be considered absent from the product. To qualify a supply, the updated documentation and, when required, the batch analysis certificate must be checked.
Caustic soda flakes: product characteristics
The product data sheet for SOD009000325 describes white or off-white hygroscopic flakes, which tend to stick together, and a minimum NaOH content of 98%. It also reports a maximum sodium chloride content of 0.020%, a maximum sodium carbonate content of 0.2%, and a maximum iron content of 10 mg/kg.
The flake form allows for solid dosing by weight. If the process requires a solution, a controlled dissolution step is necessary: the choice must therefore also consider the available equipment and procedures, not just the strength.
Caustic soda micropearls: how do they differ from flakes?
Product SOD006000025 is designated as caustic soda micropearls and described as an odorless white solid. The data sheet declares a 'minimum total alkalinity expressed as NaOH of 990 g/kg, equivalent to 99% by mass.
The specification indicates a maximum sodium carbonate content of 4 g/kg, a maximum sodium chloride content of 200 mg/kg, and a maximum iron content of 10 mg/kg. The declared strength is higher than the minimum specified for the flakes compared here, but this data alone does not establish greater suitability for a process: other analytical limits and the handling and dosing system must also be evaluated.
Flakes, micropearls and powder are not interchangeable terms. To order the correct material, it is advisable to specify the required form along with the technical specification.
30% liquid caustic soda: strength and specific gravity
The product data sheet for SODA04315000, designated as 30% caustic soda, reports a colorless or slightly opalescent liquid with a strength of 30.50% ± 1.50%. The declared specific gravity at 20 °C is 1.3290 ± 0.0100 kg/l.
The liquid solution eliminates the initial dissolution of flakes or micropearls and can be considered for liquid dosing systems. However, this does not mean it can be used without further verification: the concentration, plant materials and operating conditions must be suitable for the process.
When dosing, mass and volume must be distinguished: one liter of this solution does not equal one kilogram. For process calculations, use the data and tolerances of the applicable specification, taking temperature into account.
Industrial applications of caustic soda
Chemical and cleaning industries
Sodium hydroxide is used in the saponification of oils and fats, the production of detergents and numerous chemical processes. The choice of product depends on the formulation and the concentration and impurity requirements.
Water treatment
It can be used for pH adjustment, the neutralization of acidic streams and the precipitation of certain metals as hydroxides, within designed and controlled processes.
Dye houses and industrial applications
It can be used for pH adjustment, saponification processes and industrial equipment cleaning. For paints, formulations and surfaces, compatibility, concentration and methods of use must be verified: it is not a universal solution for every material.

How to choose the form suitable for the process
Before choosing, compare the required strength, relevant impurity limits, mass or volume dosing, the ability to handle the solid and the potential need for dissolution. For a plant that already doses solutions, the liquid form can eliminate a preparation step; for those who handle solids, flakes and micropearls must be evaluated in relation to the equipment and the required specification.
Forms should not be substituted on an equal weight or volume basis without recalculating the amount of active substance. In particular, a solution designated as 30% does not equal the same mass of solid product at 98% or 99%.
Dissolution, safety and storage
Caustic soda is highly corrosive and its dissolution in water generates a great deal of heat. The technical data sheets compared here describe the product specifications, but do not replace the safety data sheet (SDS), risk assessment or operating procedure.
We do not provide a generic preparation recipe: the calculation must consider the actual strength of the material and the required final concentration, while the operation must follow a professional procedure with temperature control and compatible equipment.
- Consult the updated SDS of the specific product before handling, use and storage.
- Use eye and face protection, gloves and chemically resistant clothing identified by the SDS and risk assessment.
- Protect the solid from moisture and store products in compatible containers and equipment.
- Keep acids and incompatible materials separate; check compatibility with aluminum, zinc and light alloys in particular.
- In case of exposure, immediately follow the instructions in the SDS and contact emergency services or the competent poison control center.
Frequently asked questions about caustic soda
Is caustic soda sodium hydroxide?
Yes. Caustic soda is the common name for sodium hydroxide, with the formula NaOH. In commercial products, the physical form and declared strength must be distinguished.
Are caustic soda powder, flakes and micropearls the same thing?
They are not interchangeable terms for the physical form. The two solid products in the compared data sheets are flakes and micropearls, not powder.
What is the difference between flakes and micropearls?
In the compared products, the form and specifications differ: flakes have a minimum of 98% NaOH; micropearls have total alkalinity expressed as NaOH of at least 99%. The choice also requires a comparison of impurities and process conditions.
Is liquid caustic soda always at 30%?
The strength of a single data sheet should not be extended to all commercial solutions. The liquid product described here is designated as 30% and has a declared strength of 30.50% ± 1.50%.
Do the technical data sheets indicate the results of a single batch?
The data sheets report specifications with limits, tolerances and declarations. They should not be confused with a certificate of analysis referring to a specific batch.
Requesting caustic soda for professional use
For a technical or commercial request, indicate the application, desired form, required strength, quantity and analytical requirements of the process. Formats, availability and updated documentation must be confirmed for the requested supply.
Consult the product data sheets for Pigment Al's caustic soda flakes, caustic soda micropearls and 30% liquid caustic soda. To request a quote, indicate the form, quantity and application and request the updated technical data sheet and SDS of the specific product.
Technical sources of the comparison
Data obtained from the technical data sheets provided for SOD009000325, revision 00007 of 16/03/2023; SOD006000025, revision 00013 of 03/04/2025; SODA04315000, revision 00003 of 15/10/2025. The specifications refer to the identified products and indicated revisions; request confirmation of the current documentation before supply.