Cellulose ethers: what are they?
Cellulose ethers are cellulose derivatives used to thicken aqueous mixtures, retain water, and improve workability. Among the most common are HPMC, used mainly in mortars and plasters, and HEC, used in emulsion paints. The type and grade are chosen based on the application.
What are cellulose ethers used for?
In a formulation, cellulose ethers can perform several functions:
- Thickening: they increase the consistency of the aqueous phase.
- Water retention: they help limit water loss and maintain workability.
- Stabilizing: they help keep pigments and fillers in suspension.
- Regulating application: they help control the spread, consistency, and behavior of the mixture.
The result depends on the grade chosen and the complete formulation: cellulose ethers are not all interchangeable.
Main types: HPMC, HEC, MC and CMC
- HPMC – Hydroxypropyl methylcellulose: used in mortars, plasters, and tile adhesives.
- HEC – Hydroxyethyl cellulose: used in emulsion paints, colorants, and water-based paints.
- MC – Methylcellulose: used in pharmaceutical, food, and construction applications, depending on the grade.
- CMC – Carboxymethyl cellulose: used in ceramics, detergents, and some aqueous systems.
Comparison between HPMC, HEC, MC and CMC
| Properties | HPMC | HEC | MC | CMC |
|---|---|---|---|---|
| Cold water solubility | Yes | Yes | Yes | Yes |
| Thermal gelation | Yes, 55–85 °C for some grades | No | Yes, 50–55 °C for some grades | No |
| Ionic charge | Non-ionic | Non-ionic | Non-ionic | Anionic |
| Indicative pH range | 3–11 | 3–12 | 4–12 at cold | 6–9 |
| Main use | Mortars and plasters | Emulsion paints and colorants | Pharmaceutical and food | Ceramics and detergents |
The comparison concerns the types and grades suitable for the aqueous systems covered in this guide. Solubility, pH, and gelation should be checked on the product data sheet: the values are not universal limits.
How to choose the type and viscosity
Start with the application, not the viscosity value. For many cementitious formulations, HPMC is evaluated; for emulsion paints, HEC is a common reference. MC and CMC meet the specific uses described in the guide.
Once the family is identified, check:
- Viscosity and measurement method: compare the values only at the same concentration, temperature, instrument, and test conditions.
- Dispersion and hydration: check how to incorporate the grade without forming lumps.
- Compatibility: consider the binder, pH, pigments, fillers, and other additives.
- Dosage: check whether the percentage refers to the dry mix, the finished paint, or another base.
A higher stated viscosity does not automatically identify the best product. Lower viscosity grades may be evaluated when greater fluidity is needed; more viscous ones when greater body is sought. The choice should be confirmed with stability, workability, and application tests in the actual mixture.
How to read the values: the viscosity on the data sheet refers to a test solution, not the final mixture. Before comparing two grades, check the solution concentration, temperature, instrument, and stated measurement conditions. For dosages, always check the calculation base: a percentage referring to the dry mix is not equivalent to the same percentage referring to the finished paint. Use the data sheet of the specific grade and confirm the choice with tests in the actual formulation.
Pigment Al distributes cellulose ethers in various grades for colorant and premix manufacturers. The selection should be confirmed by the data sheet and tests in the formulation.
To request the right grade, indicate the application, current dosage, and viscosity measurement method; request the data sheet and a quote.
HPMC – Hydroxypropyl methylcellulose
HPMC is one of the most widely used cellulose ethers in mortars, plasters, and cementitious products. It can exhibit reversible thermal gelation: appropriate grades dissolve in cold water, and the solution can gel upon heating, returning to a solution state upon cooling. The behavior depends on the grade and the system.
Note on technical data: the ranges in the individual family tables are indicative for some grades and applications. The viscosities refer to 2% test solutions, which should only be compared using the stated method and temperature. For mortars and plasters, the dosage should be checked on the dry mix; for emulsion paints, on the total weight of the paint. For other uses, the calculation base must be checked on the data sheet.
| Parameter | Indicative value |
|---|---|
| Viscosity, 2% solution | 5,000–200,000 mPa·s |
| Dosage in mortars | 0.2–0.4% |
| Dosage in plasters | 0.1–0.3% |
| Stability pH | 3–11, depending on the grade |
| Gelation temperature | 55–85 °C, depending on the grade and system |
Main applications: cementitious mortars, plasters, tile adhesives, fillers, and restoration products. For application selection, consult the guide to cellulose ethers for mortars and plasters.
HEC – Hydroxyethyl cellulose
HEC is a reference cellulose ether for emulsion paints and colorants. It does not exhibit the thermal gelation typical of HPMC. Viscosity stability and compatibility with acrylic, vinyl, and styrene-acrylic binders should be checked according to the grade and formulation.
| Parameter | Indicative value |
|---|---|
| Viscosity, 2% solution | 5,000–100,000 mPa·s |
| Dosage in emulsion paints | 0.2–0.5% |
| Stability pH | 3–12, depending on the grade |
| Typical compatibility | Iron oxides, TiO₂, and mineral fillers, to be checked |
Main applications: wall emulsion paints, exterior paints, and water-based coatings. For indicative dosages, HEC incorporation, and comparison with associative thickeners, consult the guide to cellulose ethers for emulsion paints.
MC – Methylcellulose
Methylcellulose (MC) is a non-ionic cellulose ether soluble in cold water that can gel upon heating. It is used in some pharmaceutical applications as a binder and coating, in the food industry as a stabilizer when the grade is authorized, and in construction for special mortars and restoration products.
| Parameter | Indicative value |
|---|---|
| Viscosity, 2% solution | 400–75,000 mPa·s |
| Typical dosage | 0.1–0.5% |
| Gelation temperature | 50–55 °C, depending on the grade |
| Main uses | Pharmaceutical, food, and construction, if authorized |
CMC – Carboxymethyl cellulose
CMC is an anionic cellulose ether with high thickening capacity even at low concentrations. It is used in ceramics, industrial detergents, and as a co-thickener in some paints and special formulations.
| Parameter | Indicative value |
|---|---|
| Viscosity, 2% solution | 500–50,000 mPa·s |
| Typical dosage | 0.1–0.3% |
| Stability pH | 6–9, depending on the grade |
| Ionic charge | Anionic |
How cellulose ethers are produced
Cellulose ethers are obtained by chemically modifying natural cellulose extracted from wood or cotton. The process includes two steps: alkalinization with sodium hydroxide, and etherification, which introduces chemical groups capable of modifying its properties.
The agents used depend on the type: for example, chloromethane for MC, ethylene oxide for HEC, and propylene oxide plus chloromethane for HPMC. The type and distribution of substituents, degree of substitution, and molecular weight influence viscosity, solubility, gelation, and compatibility.
Not all cellulose ethers are water-soluble: this guide mainly concerns the types used in aqueous systems.
Order of addition in the formulation
There is no single sequence for all ethers and all sectors. In dry premixes, the ether can be incorporated into the powder mixture; in water-based paints, dispersion and hydration depend on the commercial grade and the production process.
- Check the data sheet for the dispersion method, water temperature, pH, and surface treatment of the grade.
- Disperse with adequate agitation, avoiding lumps. Some grades of MC/HPMC require dispersion in hot water followed by cooling: use this method only if indicated by the manufacturer.
- Complete hydration under the prescribed conditions. Times are not universal; delayed-solubility grades may require controlled pH adjustment.
- Define the order of addition of the other components in the complete formula, checking compatibility and viscosity development.
- Check final viscosity, homogeneity, and stability before adjusting water or co-thickeners.
Applications by sector
- Construction: mortars, tile adhesives, plasters, fillers, and ETICS – HPMC.
- Paints and colorants: emulsion paints and water-based coatings – HEC.
- Pharmaceutical: binders and coatings for tablets – MC and HPMC.
- Personal care: shampoos, creams, and toothpastes – HEC and MC, depending on the grade.
- Food industry: stabilizers and gelling agents, only for authorized grades – MC.
- Ceramics and detergents: co-thickener and stabilizer – CMC.
Further reading
- Cellulose ethers for mortars and plasters: HPMC, dosages, and applications
- Cellulose ethers for emulsion paints
- Thickeners for paints: HEC, HEUR, and rheology
- Superfluidizers for concrete
FAQ – Frequently Asked Questions
What is the difference between HPMC and HEC?
HPMC can gel thermally, with the temperature depending on the grade and system; for some grades, indicative values of 55–85 °C are found. It is widely used in mortars and plasters. HEC does not exhibit the same thermal gelation and is often preferred for emulsion paints and colorants.
What is the correct dosage of cellulose ethers in emulsion paints?
For some grades and formulations, 0.2–0.5% of the total weight of the paint is an indicative range, not a universal prescription. The dosage should be defined on the data sheet and with tests in the actual formula. Higher dosages can change viscosity, gloss, workability, and film drying.
Are cellulose ethers compatible with iron oxides?
HEC and HPMC can be compatible with iron oxides, titanium dioxide, and other mineral fillers. Compatibility must be checked in the actual formulation and under the intended pH conditions.
How do you properly dissolve cellulose ether?
The method for the specific grade must be followed, avoiding lumps and controlling agitation, temperature, and pH. Hydration times are not universal. Some grades of MC/HPMC require dispersion in hot water followed by cooling for dissolution; delayed-solubility grades may require controlled pH adjustment. The procedure should be checked on the data sheet.
What is the right viscosity for wall emulsion paints?
There is no single viscosity value valid for all wall emulsion paints. The viscosity reported on the cellulose ether data sheet refers to a test solution, not the finished paint. The choice of grade must consider the polymer type, concentration, temperature, and measurement method, along with the binder, pigments, fillers, and other additives. It should be confirmed with stability, sag resistance, spreadability, and brush or roller application tests.
What is methylcellulose and how does it differ from HPMC?
Methylcellulose is a non-ionic cellulose ether with thermal gelation, used in specific grades for pharmaceutical, food, and construction applications. HPMC also contains hydroxypropyl groups and offers different properties, particularly useful in cementitious systems.
