What are concrete superplasticizers?
Superplasticizers are chemical additives that allow for a reduction in mixing water while maintaining workability. A reduction of 20–30% is indicative and does not apply to every product or mix: it must be verified in the technical data sheet and through preliminary tests. Also known as HRWR (High-Range Water Reducers), they are used in high-performance, self-consolidating, and pumped concrete. Performance and compliance with UNI EN 934-2 must be verified in the documentation of the chosen product.
Superplasticizers and plasticizers are essential chemical additives in the construction industry. They are used in concrete, damp-proofing, and refractories to improve workability, reduce water content, and increase the mechanical performance of the finished product. Discover concrete shrinkage reducers and silica fume to maximize concrete performance.
How do superplasticizers work?
Superplasticizers adsorb onto the surface of cement particles, increasing the electrostatic repulsive forces between them. This reduces mutual contact and improves the flow of the material, allowing for a reduction in the proportion of water in the mix without losing workability. Reducing water improves mechanical performance because its evaporation causes the formation of pores that weaken the structure.
Comparison table: types of concrete additives
| Type | Ideal season | Main effect | Water reduction |
|---|---|---|---|
| Superplasticizer (PC) | All year round | Water reduction + fluidity | 20–30% |
| Water reducer | Winter (down to 10°C) | Fluidity + thickening | 20–30% |
| Accelerator | Winter | Speeds up setting and hardening | — |
| Retarder | Summer | Slows hydration | — |
| Plasticizer for damp-proofing | All year round | Improves mechanical strength | Variable |
A little history
The first superplasticizers, developed in the 1970s, were based on polynaphthalene sulfonates (PNS) or polymelamine sulfonates (PMS). Since the late 1980s, additives based on polyacrylates (PA) or polycarboxylates (PC), with superior performance, have been introduced. With a dosage of 1% of additive relative to the mass of the cement, it is possible to reduce the water content of the mix by 20–30%.
Reference standard
All concrete additives are regulated by the European standard UNI EN 934-2, which defines the requirements, compliance, and evaluation criteria for additives intended for concrete, mortar, and injection mortar.
Environmental benefits
The use of superplasticizers also brings environmental benefits: by reducing the amount of water and the dosage of cement while maintaining the same performance, a reduction in CO₂ emissions and greater durability of the structures are achieved, with less need for maintenance.
Water reducers
Water reducers are acrylic-based liquids for precast concrete and refractories. Particularly suitable for use in winter climates (down to approximately 10°C), they allow for the production of fluid concrete with good workability retention. At equal workability, they reduce the water requirement by 20–30%.
Accelerators (for winter)
Setting and hardening accelerators modify the degree of cement hydration at early ages. Essential in winter when low temperatures slow down the setting. The UNI EN 934-2 standard distinguishes between setting accelerators and hardening accelerators.
Retarders (for summer)
Setting and hardening retarders reduce the degree of cement hydration in the first hours. Essential in hot climates to prevent loss of workability during transport and placing operations. Discover our Summer Superplasticizer.
Plasticizers for damp-proofing and other uses
We offer specific plasticizers for damp-proofing and other applications, formulated to increase mechanical strength and improve the workability of the mixes. Contact us for personalized advice.
To learn more about choosing the additive for concrete with a damp-proofing consistency and vibro-compressed elements, read the guide to cement plasticizers with P TU10, with the process evaluation criteria and preliminary tests on the mix.
Draining concrete, also colored
Among our most innovative solutions is the economical and high-performance single-component additive for draining concrete.
Watch our video of the first colored draining concrete made in Puglia to see the result in operation.
Availability and formats
Superplasticizers are always available at our warehouse and are seasonal. Available in the following formats: 25 kg, 200 kg, 1000 kg in IBC (contact us for availability).
Frequently asked questions about superplasticizers
What is the difference between a fluidifier and a superplasticizer?
Superplasticizers are approximately four times more effective than traditional fluidifiers in reducing mixing water, ensuring superior mechanical performance at equal workability.
What dosage is used for superplasticizers?
The dosage of 1% relative to the mass of the cement is not a universal rule. The quantity must be chosen according to the technical data sheet and verified with tests on the actual mix, even in the presence of silica fume. Check whether the percentage indicated by the manufacturer refers to the cement or the total binders.
How to choose between polycarboxylates (PC) and polynaphthalene sulfonates (PNS)?
Polycarboxylates (PC) offer superior performance, greater water reduction, and better workability retention over time: they are the ideal choice for high-performance and self-consolidating concrete. Polynaphthalene sulfonates (PNS) are more economical and suitable for standard applications.
Are superplasticizers compatible with all types of cement?
Compatibility should not be taken for granted: check the manufacturer's instructions and perform tests with the cement, other additives, and the planned operating conditions. Contact us for technical advice.
When are accelerators used, and when are retarders used?
Accelerators are used in winter to speed up setting in low-temperature conditions. Retarders are used in summer to slow down hydration and maintain workability during transport and placing.
Contact us for technical advice
For information on supply and to request a quote, consult the superplasticizer product sheet.
Do you need support in choosing the right additive for your construction site? Dario d'Erasmo — Cell. 329 795 5565 — Online contact form