PERMEABLE CONCRETE

PERMEABLE CONCRETE
what it is and how it works in construction applications

PERMEABLE CONCRETE is a porous concrete that allows rainwater to filter through the surface, eliminating standing water and reducing the risk of flooding while improving road and environmental safety. Thanks to a structure with interconnected voids (18–28%), it has an indicative drainage capacity of approximately 200 l/m²/min. It can be colored with iron oxides. With proper maintenance, it lasts 20–30 years. It is an increasingly used solution in sustainable construction, urban planning, and the creation of permeable pavements.

How does permeable concrete work?

Unlike traditional concrete, permeable concrete has a porous internal structure obtained by reducing or eliminating fine sand from the mix. This creates a network of interconnected voids that allows water to flow downwards, where it is absorbed by the soil or collected in special drainage systems.

According to the attached technical document, the void content is between 18% and 28% and the drainage capacity is around 200 liters per square meter per minute.

Applications of permeable concrete

  • Parking lots and rest areas
  • Bicycle paths and pedestrian walkways
  • Private driveways and courtyards
  • Plazas and urban areas
  • Pool edges and sports areas
  • Low-traffic roads

Colored permeable concrete

One of the most interesting innovations is colored permeable concrete, obtained by adding iron oxides to the mix and only Fibratec A/R glass fibers.
This allows the creation of permeable pavements in colors such as red, green, yellow, and black, ideal for bicycle paths, pedestrian walkways, and urban areas that require color coding in addition to the drainage function.

Watch our video of colored permeable CLS made in Puglia.

Permeable concrete pavement made in Modugno, Bari
Photo of permeable concrete with FS, 6 km (Modugno BA)

Advantages of permeable concrete

  • Reduction of standing water: eliminates puddles and reduces the risk of flooding
  • Road safety: improves vehicle traction in case of rain
  • Environmental sustainability: promotes the recharge of aquifers
  • Reduction of the heat island effect: evaporating water cools the surface
  • Regulatory compliance: meets European regulations on stormwater management
  • Aesthetics: available in a colored version for decorative applications

Additives for permeable concrete

To achieve the best performance, permeable concrete requires the use of glass fibers and specific additives such as superplasticizers, thickeners, and binding agents that ensure cohesion between the aggregates while maintaining porosity.

To learn more about the specific product available for these applications, consult the Additive for permeable CLS data sheet. Dosage and compatibility must be verified based on the formulation and the product's technical instructions.

Technical documents on permeable concrete,
REFERENCE STANDARDS

To learn more about material requirements and operating procedures, consult the downloadable technical documents developed by Geom Tecnologo Pietro Guerrieri and Dario d'Erasmo:

Frequently asked questions about permeable concrete

What is permeable concrete?

Permeable concrete is a porous concrete that allows water to filter through the surface. It has an internal structure with interconnected voids (18–28%) that ensure high permeability, reducing standing water and flooding.

How long does permeable concrete last?

With proper placement and maintenance, permeable concrete has a lifespan of 20–30 years. The main maintenance consists of periodic pressure washing with water to prevent the pores from being clogged by debris and sediment.

Is permeable concrete frost-resistant?

Yes, if correctly formulated with specific additives. The porous structure can be vulnerable to freeze-thaw cycles if the pores fill with water, but the use of air-entraining additives and the correct design of the subgrade solve this problem.
our video:
https://www.youtube.com/shorts/eIBBTN6tHP4

Can permeable concrete be colored?

Yes, by adding iron oxides to the mix, it is possible to obtain colored permeable concrete in red, green, yellow, black, and other colors. It is the ideal solution for bicycle paths and pedestrian walkways that require color coding.

What is the cost of permeable concrete compared to traditional concrete?

Permeable concrete generally has a cost 20–40% higher than traditional concrete due to the special aggregates and necessary additives. However, it eliminates the costs of a traditional drainage system and reduces long-term maintenance costs.

Where can I buy additives and pigments for permeable concrete?

Pigment Al provides iron oxides, colored granules, and specific additives for permeable concrete. Contact us for information and quotes.

Contact form