Iron Oxide Pigments: Complete Guide, Properties and Applications
Iron oxide is a compound of iron and oxygen. In the pigment industry, the term “iron oxides” covers several families used to colour concrete, mortars, paints and ceramics. This guide compares the main types, colours and applications, distinguishes oxides from oxyhydroxides, and explains what to check when selecting a suitable grade.
Explore the available products in the Pigments and Iron Oxides collection. To identify a suitable grade, share the intended application, binder, target shade and required quantity.
At a glance: iron oxide pigments are inorganic red, yellow, black, orange and brown pigments used in concrete, mortars, coatings and ceramics. In cement-based applications, typical starting dosages are around 1–5% by cement weight. For cementitious applications, select a grade with the relevant EN 12878 documentation.
This guide covers iron oxide types, technical properties, practical applications, indicative dosage ranges and frequently asked questions.

What are iron oxides?
Iron oxides are chemical compounds made of iron and oxygen. They occur naturally as iron-bearing minerals and are also manufactured synthetically for industrial use. They are fine, water-insoluble powders with strong colouring power and generally high light and weather resistance. Actual performance depends on the specific grade and application.
The main compounds used as pigments include:
- Iron(III) oxide (Fe₂O₃) — red
- Iron(II,III) oxide (Fe₃O₄) — black (magnetite)
- Iron oxyhydroxide (FeOOH) — yellow (goethite)
Iron oxides and iron hydroxides: what is the difference?
An oxide contains iron and oxygen, while a hydroxide also contains hydroxyl (OH) groups. Yellow FeOOH pigment is more precisely an oxyhydroxide, whereas Fe₂O₃ and Fe₃O₄ are oxides. In commercial terminology, these families are often grouped together under the name “iron oxides”. The distinction is particularly useful when assessing behaviour at elevated temperatures and selecting a grade for a formulation.
Types of iron oxide pigments: colours and chemical formulas
Iron oxide pigments are available in five main colour groups, each with specific characteristics and uses:
| Type | Indicative formula or composition | Shade | Thermal behaviour | Main applications |
|---|---|---|---|---|
| Red iron oxide | Fe₂O₃ | Red, terracotta, brick, burgundy | Check the grade and thermal cycle | Concrete, coatings and ceramics; other uses only with suitable grades |
| Yellow iron oxide | FeOOH | Yellow, ochre, tan, sand | May transform when heated, with a colour change | Concrete, renders and coatings |
| Black iron oxide | Fe₃O₄ | Black, dark grey, anthracite | Possible transformations depending on temperature and atmosphere | Concrete, asphalt and coatings |
| Orange iron oxide | Specific grade or pigment blend | Orange, rust, copper, sienna | Depends on composition | Concrete, coatings and ceramics subject to verification |
| Brown iron oxide | Often a blend of oxides; check the technical data | Brown, cocoa, umber | Depends on the components | Renders, paving and decorative paints |
Iron oxide colours: from pigment to finished surface
Red, yellow and black are the main pigment families; orange and brown shades may come from specific grades or blends. The powder colour does not necessarily match the finished surface. White or grey cement, fillers, dosage, water-to-cement ratio and curing all affect the result. When selecting a shade, compare samples made with the actual binder and finish rather than relying only on photographs or RAL references.
Transparent iron oxides and opaque pigments
Transparent iron oxides are grades designed to add colour while limiting hiding power, typically through very fine particles and suitable dispersion. They are used, for example, in coatings where the substrate should remain visible. They are not interchangeable with the opaque pigments commonly used to colour cement: transparency, colour strength and compatibility must be assessed in the actual binder. Not all iron oxides are transparent, and a finer grade alone does not guarantee this performance.
Colour-specific technical guides
Each colour family has its own characteristics and deserves a closer look. Read our technical guides:
- Red iron oxide — Fe₂O₃ properties, shades and dosage considerations
- Yellow iron oxide — FeOOH (goethite) properties, dosage and applications
- Black iron oxide — Fe₃O₄ magnetite for concrete, asphalt and coatings
- Red iron oxide for lime render — a guide to lime-based applications and traditional renders
- Bayferrox iron oxides (Lanxess) — an overview of grades and technical documentation
Synthetic vs natural iron oxides
Synthetic iron oxides are manufactured through controlled industrial processes such as precipitation, calcination and oxidation. Qualified grades can offer:
- Controlled purity and shade consistency between batches
- Colour strength that can be checked through comparative testing
- Controlled particle size to support dispersion
- Documentation for the intended application; food or cosmetic suitability only for specifically approved grades
Natural iron oxides, also known as earth pigments, are extracted from the ground and milled. They include ochres, siennas and umbers. Their warmer, more varied shades are valued in artistic applications and traditional finishes.

Technical properties of iron oxide pigments
- Lightfastness: generally high for suitable grades; assess the complete system.
- Alkali resistance: important for cement and lime applications; confirm it in the grade documentation.
- Chemical stability: insoluble in water; resistance to other agents depends on the compound and conditions.
- Safety: consult the SDS. Food or cosmetic suitability does not apply to industrial grades by default.
- Compatibility: assess the pigment with cement, lime, gypsum and resins in the actual formulation.
- Regulatory compliance: for cementitious applications, request the EN 12878 documentation for the specific product grade.
Relevant standards and regulations for iron oxides
Professional use requires checking the standards and documents applicable to the product and its intended application:
- EN 12878 — requirements and test methods for pigments used in construction materials based on cement and/or lime. It does not prescribe a universal dosage of 1–5%.
- REACH (EC Regulation 1907/2006) — obligations applicable to chemical substances; it is not a certification of harmlessness.
- E172 — identifies iron oxides and hydroxides for food uses. Check the applicable authorisations, specifications and intended use. It does not make an industrial pigment suitable for food.
- Cosmetics Regulation (EC) 1223/2009 — verify the requirements and conditions of use for the specific colourant grade.
- ISO 787 — general test methods for pigments and extenders.
Before use, request the technical data sheet, safety data sheet and compliance documentation relevant to the purchased grade.
Colour chart: shades and RAL references
| Iron oxide | Typical shade | Indicative RAL reference | Notes |
|---|---|---|---|
| Red | Terracotta / Brick | RAL 3009, RAL 3013 | Varies with dosage and cement type |
| Yellow | Ochre / Sand | RAL 1011, RAL 1024 | Heating may change the colour |
| Black | Anthracite / Black | RAL 9005, RAL 7016 | Check behaviour during the thermal cycle |
| Orange | Rust / Copper | RAL 2001, RAL 8023 | Composition depends on the grade |
| Brown | Umber / Cocoa | RAL 8002, RAL 8011 | Often a blend of oxides |
Note: RAL references are not guaranteed colour matches. Final shades depend on the binder, water-to-cement ratio and curing. Always request samples before full-scale production.
How to colour concrete with iron oxide pigments
Integral colouring of concrete with iron oxide pigments produces coloured surfaces throughout the mix. Select a suitable pigment and use a repeatable process.
- Select a red, yellow, black, brown or orange grade suitable for cement. Chrome green is a different pigment, not an iron oxide.
- Calculate the dosage based on cement weight: 1–5% is an initial reference range that must be confirmed by trials and the technical data sheet.
- Add the pigment according to its format and the manufacturer's instructions; dry blending and pre-dispersion are not interchangeable procedures for every grade.
- Add the water specified in the formulation and mix until evenly distributed, using mixing times validated for the plant.
- Keep raw materials, water-to-cement ratio and processing conditions consistent between batches or pours.
- Assess the colour on dry, cured samples produced under the same conditions, not on wet concrete.
For application guidance, see our guide on how to colour concrete with iron oxide pigments.
Iron oxide dosage by application
| Application | Formulation reference | Notes |
|---|---|---|
| Integrally coloured concrete | 1–5% by cement weight | Indicative range, not an EN 12878 prescription; verify colour strength and mix properties |
| Mortars and renders | 2–5% by binder weight, to be verified | Addition sequence depends on the grade format and technical data |
| Water-based paints and coatings | According to pigment loading and formulation | Disperse with dispersants compatible with the system |
| Coloured asphalt | According to the formulation and stated calculation basis | Check processing temperature and pigment suitability |
| Ceramics and glazes | According to the formulation, based on dry weight | Colour depends on firing cycle, atmosphere and matrix |
| Cosmetics | According to the formulation and applicable requirements | Use only grades suitable for cosmetic applications |
Bayferrox (Lanxess) vs generic iron oxides
| Feature | What to compare |
|---|---|
| Batch-to-batch colour consistency | Compare specifications and test results; do not assume a universal ΔE limit for an entire product line |
| Technical documentation | Request TDS, SDS and relevant documents for both products |
| Project specifications | Check the performance and requirements stated in the project |
| Price | Assess cost against colour strength and actual dosage |
| Application | Qualify the grade in the real mix, not on brand name alone |
Pigment Al supplies both product lines: read the complete Bayferrox guide.
Applications in paints and coatings
In water-based paints and coatings, iron oxides are established pigments for earthy, ochre, rust and anthracite shades. Compatibility with acrylic, alkyd, epoxy and silicone binders must be assessed in the formulation. Red iron oxide may be used in primers, but colour or the presence of Fe₂O₃ alone does not guarantee a passivating effect or anticorrosive protection in a coating.
Applications in ceramics
In ceramics and glazes, iron oxides can produce different shades depending on the matrix and firing cycle. Yellow FeOOH may transform when heated, while black Fe₃O₄ may oxidise or undergo other transformations. Do not assume that the powder's initial colour or a temperature stated in a data sheet will predict the glaze result: assess the grade, temperature, atmosphere and firing time.
Where to buy quality iron oxide pigments
Pigment Al supplies iron oxide pigments for professional applications. Check the availability of pack sizes, technical data sheets, SDS and EN 12878 documentation for the required grade.
- Request a quote for Red Iron Oxide
- Request a quote for Yellow Iron Oxide
- Request a quote for Black Iron Oxide
- Request a quote for Orange Iron Oxide
- Request a quote for Brown Iron Oxide
- Cobalt Blue, a pigment from a different family than iron oxides
- View the green product and check the grade composition
For orders over 100 kg or technical samples, contact us directly.
Frequently asked questions about iron oxides
What are iron oxides?
Iron oxides are chemical compounds of iron and oxygen used as inorganic pigments in construction, ceramics and coatings. In commercial terminology, the group also includes yellow FeOOH, which is an oxyhydroxide. Food or cosmetic uses require grades specifically suitable for those applications.
What are iron oxides used for?
They are mainly used to colour concrete, mortars, renders, coatings, paints, ceramics and asphalt. Other uses, including food and cosmetic applications, require verification of the grade and applicable requirements.
How do you colour concrete with iron oxide pigments?
Select a suitable pigment, calculate the dosage by cement weight and add it according to the grade and plant instructions. A range of 1–5% is an initial reference. Compare the colour on dry, cured samples prepared under repeatable conditions.
What is the dosage of iron oxide in concrete?
A range of 1–5% by cement weight is commonly considered as an initial formulation reference, to be confirmed through the technical data sheet and trials. It is not a dosage required by EN 12878 and does not by itself guarantee pigment or mix compliance.
What is the difference between synthetic and natural iron oxides?
Synthetic grades are manufactured through controlled processes to obtain defined characteristics; natural grades, or coloured earths, have a composition linked to their geological origin. Purity, colour strength and consistency should be compared for the specific grades rather than generalised across the whole family.
What is the difference between red, yellow and black iron oxide?
Red is generally Fe₂O₃, yellow is FeOOH and black is Fe₃O₄. They differ in composition and shade; thermal behaviour depends on the grade, temperature and process atmosphere. Yellow and black grades may transform when heated.
Are iron oxides toxic? Are iron oxides harmful?
It is not appropriate to describe every grade as harmless. Consult the product safety data sheet and follow the protective measures specified for powders. For food or cosmetic uses, use only grades suitable for the intended application; REACH compliance is not a guarantee of harmlessness.
What is EN 12878?
EN 12878 defines requirements and test methods for pigments intended for construction materials based on cement and/or lime. Compliance must be documented for the specific product and does not follow from choosing a dosage of 1–5%.