Red Iron Oxide for Lime Plaster

Red Iron Oxide for Lime Plaster

Red iron oxide (Fe₂O₃) is the standard inorganic pigment for coloring lime-based plasters. Stable in alkaline environments (pH 12–13), UV-resistant, and weather-resistant, it guarantees a permanent and uniform color on hydrated lime, hydraulic lime, and white cement plasters.

To compare the different pigment families, consult the guide to the types, colors, and applications of iron oxide.

In short

  • Indicative dosage: 0.5–5% by weight of the dry binder
  • Compatible with hydrated lime, hydraulic lime, aerial lime, and white cement
  • Add the pigment dry before adding water
  • UV, alkali, and weather-resistant
  • Always perform a sample test to check the final shade

Recommended dosages for lime plasters

Shade Dosage by weight of dry binder Indicative RAL reference
Pale pink 0.5–1% RAL 3015
Light terracotta 1–2% RAL 8004
Brick red 2–3% RAL 3009
Intense iron red 3–5% RAL 3013

How to incorporate red iron oxide into lime plaster

  1. Add dry: mix the pigment with the lime and aggregates before adding water.
  2. Mix for 3–5 minutes: this ensures an even distribution of color.
  3. Always use the same water source: variations in water pH can affect the final shade.
  4. Weigh the pigment: do not measure by eye, to ensure uniformity between batches.

FAQ — Frequently Asked Questions

Is red iron oxide compatible with hydrated lime?

Yes, it is fully compatible with hydrated lime, hydraulic lime, and white cement. It does not react with the binder or alter the setting times.

What is the correct dosage for a terracotta-colored lime plaster?

For a terracotta shade (RAL 8004), the recommended dosage is 2–4% by weight of the dry binder. Always perform a sample test before final application.

Does red iron oxide fade over time on exterior plasters?

No. Red iron oxide has excellent light resistance (lightfastness 8/8) and does not fade when exposed to UV rays. It is the standard pigment for exterior applications.

Can red iron oxide be used with aerial lime?

Yes, it is also compatible with aerial lime (CL 90). Note: aerial lime has long carbonation times; the final color stabilizes completely 4–8 weeks after application.

How much red iron oxide is needed for 100 kg of lime?

For a medium shade (2–3%): 2–3 kg of pigment per 100 kg of dry lime. For intense shades (4–5%): 4–5 kg per 100 kg of lime.

Red iron oxide for coloring lime plaster