What is red iron oxide?
In short: red iron oxide (Fe₂O₃, hematite) is a stable inorganic pigment for concrete, mortars, plasters, paints, and ceramics. In cementitious materials, it is used at approximately 1–5% by weight of cement. For concrete, a grade compliant with standard EN 12878 must be selected.
Red iron oxide is an inorganic pigment with a terracotta-red color, derived from the oxidation of iron. It is available as a fine powder with an intense red color; grades for construction are resistant to the alkalis in cement (pH 12–13). Thermal stability and compliance with standard EN 12878 should be verified in the technical data sheet of the specific grade. It is a pigment used in professional construction for its color stability; the safety profile should be assessed based on the specific grade and its corresponding safety data sheet.
➡️ Buy red iron oxide Fe₂O₃ from Pigment Al — available in 25 kg bags.
Chemical and Physical Properties
| Parameter | Value |
|---|---|
| Chemical formula | Fe₂O₃ |
| Fe₂O₃ content | To be verified in the technical data sheet of the specific grade |
| Crystal form | Hematite (trigonal) |
| Density | ~5.2 g/cm³, to be verified for the specific grade; not equivalent to the powder's bulk density |
| Thermal stability | To be verified depending on the grade, matrix, and processing conditions |
| Light stability | Verify the data and test method in the grade's technical data sheet |
| Alkali resistance | Verify the grade's suitability for the binder and conditions of use |
| Solubility in water | insoluble |
| Regulatory compliance | Verify EN 12878 for use in concrete; REACH and potential E172 suitability depend on the grade and the supplier's documentation |
What is red iron oxide used for?
Red iron oxide is used as a coloring pigment in concrete, cement mortars, lime-based plasters, paints, coatings, and ceramics. For outdoor and alkaline environments, choose a grade with documented performance for the application and verify its behavior in the actual formulation.
Recommended Dosages for Concrete
The 1–5% range by weight of cement reported in this guide is an indicative reference, not a prescription valid for every pigment and formulation. The actual dosage must be determined using the grade's technical data sheet and tests on the actual mixture.
There is no universal correspondence between the percentage of red oxide and the RAL code. The final color also depends on the type and color of the cement, aggregates, water/cement ratio, finish, and curing. For a reference color, prepare samples with different dosages and compare them under uniform curing and observation conditions. A RAL code is a reference for comparison, not a result guaranteed by dosage alone.
Increasing the dosage does not guarantee a proportional increase in intensity. Before exceeding the dosage recommended by the supplier, verify the color benefit and the effects on the mixture's performance.
Calculation example: with 100 kg of cement, a dosage of 1–5% corresponds to 1–5 kg of pigment. The percentage is calculated based on the weight of the cement, not the total weight of the concrete; verify the shade and performance with a test on the actual mixture.
Main Applications
Concrete and Cement Mortars
Red iron oxide is used for coloring architectural concrete, screeds, precast blocks, and concrete pavements. For outdoor applications, verify alkali and weather resistance in the documentation of the specific grade.
Plasters and Lime-Based Mortars
It can be used with hydrated lime, hydraulic lime, and white cement by choosing a suitable grade. For decorative plasters, colored fillers, and restoration mortars, confirm compatibility, dosage, and shade with the technical data sheet and a test on the actual binder. For more technical information, consult our guide to red iron oxide for lime plaster.
Paints and Coatings
Used as a primary pigment in wall paints, rust primers, alkyd paints, and aqueous formulations. Hiding power and color stability depend on the grade, dispersion, and formulation.
Ceramics and Building Materials
It is used in the coloring of ceramic clays and glazes. Color and firing behavior must be verified with tests on the specific system: temperature, atmosphere, and firing cycle do not allow for universal color stability.
Roadwork and Infrastructure
Red iron oxide finds use in some formulations for pavements and roadwork, choosing a grade suitable for the binder and process. For specific dosages and site regulations, consult the guide to red iron oxide for roadwork.
Comparison with Red Organic Pigments
The choice does not depend solely on the distinction between organic and inorganic pigments. To compare two grades, assess the documented performance in the same application.
| Characteristic | Red iron oxide (inorganic) | Red organic pigment |
|---|---|---|
| Thermal stability | To be verified for grade and process | To be verified for family, grade, and process |
| UV resistance | Verify the data for the grade and application | Not generalizable: verify the specific grade |
| Alkali resistance | Choose a grade suitable for the binder | Verify the grade's compatibility with the binder |
| Coloring power | Compare under the same test conditions | Compare under the same test conditions |
| Cost | Assess the cost at the required dosage | Assess the cost at the required dosage |
| Suitable for cement | Verify the documented suitability of the grade | Do not exclude or confirm suitability without data on the specific grade |
How is red iron oxide used?
- Concrete and mortars: follow the addition sequence indicated for the pigment and the plant used. Mixing time and intensity depend on the pigment's form, equipment, and mixture; verify homogeneity with tests, without assuming a universal time.
- Aqueous paints: define dispersion and addition order according to the grade and formulation, verifying the dispersant and processing conditions.
- Ceramics: define incorporation and dosage with tests on the clay or glaze and the actual firing cycle.
Regulatory Compliance
- EN 12878: European standard for pigments intended for coloring concrete and cement mortars; verify the compliance of the selected grade in the supplier's documentation.
- REACH: registration and compliance depend on the product and applicable obligations; verify the supplier's documentation.
- E172: some iron oxides and hydroxides may be authorized as food colorings if they comply with applicable requirements; verify the specific grade and the supplier's documentation.
- Safety and classification: consult the safety data sheet of the specific product and follow the precautions indicated for handling powders. Do not infer the classification from the pigment's name alone or from the percentage of use.
Where to buy red iron oxide
Pigment Al supplies red iron oxide Fe₂O₃ in 25 kg bags for prefabricators and large construction sites.
Buy red iron oxide from Pigment Al →
Related in-depth information
- Complete guide to iron oxides: all colors and applications
- Red iron oxide for roadwork: dosages and regulations
- Red iron oxide for lime plaster: technical guide
- Yellow Iron Oxide FeOOH: complete technical guide
- Black Iron Oxide Fe₃O₄: complete technical guide
- How to color concrete with iron oxides
- Bayferrox iron oxides (Lanxess): technical guide
FAQ — Frequently Asked Questions
Is red iron oxide resistant to the alkalinity of cement?
For concrete and mortars, choose a grade with documented alkali resistance and verify its suitability in the actual formulation.
What is the difference between synthetic and natural red iron oxide?
To compare a synthetic with a natural, assess purity, color consistency, particle size, and performance in the technical data sheets of the two grades, confirming them with tests in the same formulation.
Is red iron oxide toxic?
Classification and suitability depend on the specific grade and product documentation. For construction and industrial use, follow the safety data sheet and adopt standard precautions against powders.
How much red iron oxide is needed to color concrete?
The 1–5% by weight of cement is an indicative reference reported in this guide, not a universal dosage. Define the quantity with the technical data sheet and tests that take into account the pigment, cement, aggregates, and required shade.
Is red iron oxide suitable for lime-based plasters?
It can be used by choosing a suitable grade. Verify compatibility, dosage, and color with the supplier's documentation and a test on the actual plaster.
Which RAL codes correspond to red iron oxide?
There is no unique RAL code or universal correspondence between code and dosage. The result depends on the pigment, binder, aggregates, water, and finish. Compare samples of the actual mixture with the chosen color reference under uniform conditions.
Does red iron oxide expire?
Shelf life depends on the product and storage conditions. Store in an intact package, in a dry place, and follow the shelf life or instructions provided by the manufacturer.
