Gray Silica Fume

Grey Silica Fume: Technical Guide

Grey silica fume (silica fume, microsilica) is an ultrafine byproduct of ferrosilicon and metallic silicon production in electric arc furnaces. The spherical particles have an average diameter of 0.1–0.2 μm, about 100 times smaller than Portland cement, with an SiO₂ content of 85–92% and high pozzolanic activity. It is used in high-performance concrete (HPC), ultra-high-performance concrete (UHPC), shotcrete, refractories, and industrial flooring. Grades intended for use in concrete may fall under the EN 13263-1 standard: always check the technical data sheet of the specific product. It is often combined with metakaolin and superplasticizers.

Grey silica fume, microsilica for HPC concrete, shotcrete and refractories

Physicochemical properties

Parameter Typical value
SiO₂ content 85–92%
Average particle diameter 0.1–0.2 μm
BET specific surface area 15–25 m²/g
Bulk density 200–350 kg/m³
Color Dark grey
Pozzolanic activity Very high
Compliance To be verified according to the grade and product documentation

Applications and dosages

HPC and structural concrete

Indicative dosage: 5–10% by weight of cement. Silica fume can reduce capillary porosity, contribute to mechanical strength, and improve durability in aggressive environments (chlorides, sulfates, freeze-thaw cycles). The extent of the effect depends on the mix, water/binder ratio, curing, and other additives. It is generally combined with a PCE superplasticizer to maintain workability.

Shotcrete

Indicative dosage 5–10%. It can contribute to substrate adhesion, rebound reduction, and early strength development. Suitability must be verified based on the actual formulation and spraying process, particularly for tunnel and excavation consolidation.

Repair mortars and microconcretes

Indicative dosage 5–10% by weight of binder. It can improve substrate adhesion and contribute to reduced permeability. The superplasticizer dosage must be determined through tests on the actual formulation.

Industrial flooring

Indicative dosage 5–8%. It can contribute to abrasion resistance and reduced surface dusting, depending on the concrete design, placement, and curing.

Refractories

Indicative dosage 3–10% by dry weight. It can contribute to hot mechanical strength and reduced porosity of the refractory product, depending on the binder system and operating temperature.

Technical benefits

Benefit Indication
Compressive strength Possible increase, to be verified on the mix
Chloride permeability Potential reduction, to be verified with tests
Abrasion resistance Can be improved with proper design and placement
Durability in marine environments Can contribute to durability; verify the finished system

Difference between grey and white silica fume

Characteristic Grey silica fume White silica fume
SiO₂ content 85–92% >94%
Color Dark grey White / light grey
Cost Lower Higher
Ideal applications Structural concrete, shotcrete, refractories UHPC, architectural concrete, technical ceramics

Usage tips

  • Add the silica fume during the dry mixing phase before adding water.
  • It may be necessary to increase the superplasticizer (PCE) dosage compared to the base formulation: determine the value with workability tests.
  • Use a w/c ratio appropriate to the mix design and verify the pozzolanic activity in the actual system.
  • Store in a dry place, away from moisture: silica fume is hygroscopic.

FAQ — Frequently Asked Questions

What is grey silica fume and how is it produced?

Grey silica fume is an ultrafine byproduct of ferrosilicon and metallic silicon production in electric arc furnaces. The spherical particles have an average diameter of 0.1–0.2 μm, with 85–92% SiO₂ and high pozzolanic activity.

What is the dosage of grey silica fume in concrete?

As a formulation reference, 5–10% by weight of cement is often used. The actual dosage depends on the mix design and must be verified with tests; generally, it is also necessary to evaluate its combination with a superplasticizer.

What benefits does grey silica fume bring to concrete?

It can contribute to reduced porosity and permeability, mechanical strength, and durability in aggressive environments. Results depend on the mix, placement, curing, and exposure conditions.

What is the difference between grey and white silica fume?

Grey silica fume has 85–92% SiO₂, a dark grey color, and generally a lower cost: it is used mainly for structural concrete, shotcrete, and refractories. White silica fume has >94% SiO₂ and a more neutral color: it may be preferred for UHPC, architectural concrete, and technical ceramics.

Is grey silica fume compliant with European standards?

Grades intended for use in concrete may comply with the EN 13263-1 standard. Always check the technical data sheet, declaration of performance, and documentation of the specific product.