White Silica Fume
White silica fume, also known as white microsilica, is used in cement mixtures for its pozzolanic activity. This guide presents the P-SIL product based on the available technical data sheet: microsilicates treated to promote dispersion, with the white version described as obtained from grey silica through bleaching for white products. For a comparison with the grey version, see the guide to grey silica fume. Any combination with PCE superplasticizers must be verified in the formulation.
Physicochemical properties
The following values are those reported in the P-SIL white or grey data sheet and should not be automatically extended to other grades of microsilica.
| Parameter | P-SIL data sheet value |
|---|---|
| State | Powder |
| Amorphous SiO₂ content | 93–98% |
| Apparent density | 0.750 ± 0.100 kg/dm³ |
| Particle size distribution | Minimum 98% below 0.180 mm |
| Moisture | Maximum 4% |
| Solubility in water | Insoluble |

Applications and dosages
The dosage of P-SIL is normally between 1–10% by weight of cement, depending on the mixture and the desired characteristics. The actual value must be determined with preliminary tests, verifying the workability and performance of the finished material.
HPC and UHPC concrete
The data sheet indicates the use of P-SIL in concrete with high mechanical and durability characteristics. Pozzolanic activity and void filling can contribute to the compactness of the cement paste. For HPC and UHPC formulations, guaranteed strengths cannot be inferred from the addition of the product alone: the entire system must be verified with specific tests.
Mortars and microconcretes
The indicated uses include high-strength mortars, thixotropic mortars for repairs, and non-shrink mortars. P-SIL can help reduce permeability and improve compactness; the dosage of superplasticizer must be determined with tests, without preset percentage increases.
Grout and pumpable concrete
The data sheet reports its use in protective grouts, consolidation injection grouts, expansive grouts, and pumpable concrete, as well as for reducing bleeding. Verify its behavior in the actual mixture and application process.
Refractories, technical ceramics, and silicone rubbers
The attached P-SIL data sheet does not provide specific indications for these uses. The suitability of the grade, purity requirements, and usage conditions must be assessed with the technical service before application; the dosage for cement should not be automatically transferred to systems with other binders.
Usage tips
- Determine the dosage within the normal range of 1–10% by weight of cement through formulation tests.
- Verify the dispersion method and mixing sequence in the actual process.
- Adjust water and superplasticizer according to the required workability and performance, without applying universal ratios or increases.
- Store in a dry place in the original, tightly closed bags. The data sheet indicates a validity of 12 months from the date of the transport document under the specified conditions.
- For handling precautions, consult the safety data sheet.
Difference between white and grey silica fume
For P-SIL, the data sheet describes the white version as derived from grey silica through a bleaching process for white products. The choice for architectural concrete must also be verified with color tests on the product. It is not correct to automatically attribute different silica contents, purities, or performances to the two versions without specific documentation. Learn more in the guide to grey silica fume.
FAQ — Frequently Asked Questions
What is white silica fume?
The P-SIL product presented in this guide consists of microsilicates with high pozzolanic activity, treated to promote dispersion. The data sheet describes the white version as obtained from grey silica through bleaching for white products.
What is the dosage for HPC concrete?
For P-SIL, the data sheet normally indicates 1–10% by weight of cement, depending on the mixture and the desired characteristics. Suitability and performance in an HPC or UHPC formulation must be verified with specific tests.
Difference between white and grey silica fume?
The P-SIL data sheet includes both the white and grey versions and describes bleaching for white products. The choice must be verified in the grade documentation and with formulation tests, including the color result.
Conclusions
P-SIL white silica fume is a pozzolanic addition for cement mixtures, normally dosed at 1–10% by weight of cement and evaluated with preliminary tests. For supply requests or technical advice, view the White Silica Fume product on Pigment Al or contact us.
P-SIL white or grey data sheet
Consult the full document for P-SIL characteristics, uses, dosages, test methods, and storage conditions. For safety, also refer to the safety data sheet.