Zinc Phosphate

Zinc Phosphate

Zinc phosphate is an inorganic anticorrosive pigment used in primers and protective coatings for metal surfaces. It is insoluble or poorly soluble in water and helps limit corrosion, improving paint protection and adhesion.

In short: zinc phosphate is an anticorrosive pigment used in primers to protect iron, cast iron, and steel from rust and promote paint adhesion. The recommended dosage is 10–25% of the formulation and should be verified based on the binder, grade, and technical tests.

What is zinc phosphate?

Zinc phosphate, with the basic formula Zn₃(PO₄)₂, is a mineral compound made of zinc and phosphate. In paint systems, it is used as an active pigment in anticorrosive primers, where it helps passivate the metal surface and form a protective barrier.

It is used as an alternative to lead- and chromate-based anticorrosive pigments, which are now highly restricted or subject to restrictions in many applications. Compliance must always be verified in the safety data sheet and the technical documentation of the purchased grade.

Technical properties

ParameterIndicationsBasic formulaZn₃(PO₄)₂AppearanceWhite powderDensityApproximately 3.0 g/cm³, depending on the gradeSolubility in waterPractically insolubleMain useActive pigment for anticorrosive primers and coatings

What is zinc phosphate used for?

  • Protect iron, cast iron, carbon steel, and alloy steels from corrosion.
  • Promote adhesion between the metal substrate and the paint.
  • Slow down rust formation in anticorrosive primers.
  • Improve the durability of metal coating systems.
  • Prepare the surface for subsequent protective finishes.

To learn more about the role of mineral pigments in protective systems, also consult the guide to iron oxides and the in-depth guide to iron oxide-based color pastes.

Recommended dosages in primers

The dosages reported are indicative and must be verified through laboratory tests, technical data sheets, and compatibility with the binder used.

ApplicationRecommended dosage in the formulationIndicationsAlkyd anticorrosive primer15–25%Can be combined with inert fillers such as barium sulfate or talc.Epoxy primer10–20%Suitable for systems intended for properly prepared metal surfaces.Water-based primer10–15%A micronized grade can promote dispersion and suspension stability.Direct-to-metal paint8–15%To be evaluated together with the resin and the required barrier level.

How does the anticorrosive action work?

Zinc phosphate helps passivate the metal surface and form sparingly soluble compounds that hinder the diffusion of water and oxygen. In this way, it helps reduce the electrochemical processes responsible for corrosion and improves the protection offered by the paint system.

The final performance also depends on the preparation of the substrate, the type of binder, the dispersion of the pigment, the film thickness, and the exposure conditions.

Zinc phosphating and the difference from galvanizing

Phosphate-based coatings can be used as a protective treatment, as a support for lubricants, or as preparation for subsequent painting. The main phosphates used in metal treatments are zinc, iron, and manganese phosphates.

Zinc phosphating is a surface conversion treatment that can be applied, depending on the process, by dipping or spraying. In some industrial cycles, the treatment temperature is around 70 °C, but parameters and conditions must be defined based on the metal and the formulation.

The treatment can be used on iron, cast iron, carbon steel, and alloy steels. In addition to improving corrosion protection, it creates an anchoring base for paints, lacquers, rubbers, PTFE, stearates, and other coatings.

Phosphating should not be confused with galvanizing: galvanizing deposits a metallic layer of zinc, while zinc phosphating modifies the metal surface to prepare it for painting and improve anticorrosive protection.

FAQ on zinc phosphate

What is zinc phosphate?

It is an inorganic compound with the basic formula Zn₃(PO₄)₂, used mainly as an active pigment in anticorrosive primers and coatings for metals.

What is zinc phosphate used for?

It is used to protect metal surfaces from corrosion, improve paint adhesion, and prepare the substrate for the subsequent application of protective finishes.

What is the dosage of zinc phosphate in primers?

As a general guideline, the dosage can range from 10% to 25% of the formulation, depending on the type of primer, the binder, and the required performance. The final value must be established through tests and technical documentation.

Is zinc phosphate compatible with water-based binders?

Yes, it can be used in various water-based systems. For these applications, it is important to choose a suitable grade and verify dispersion, stability, and compatibility with the binder.

What is the difference between zinc phosphate and galvanizing?

Galvanizing deposits a metallic layer of zinc, while zinc phosphating is a surface conversion treatment that prepares the metal for painting and helps provide anticorrosive protection.

Zinc phosphate-based anticorrosive pigment for metal primers