Lattice for Concrete

What is cement latex?

Cement latex is an aqueous dispersion of synthetic polymers — typically styrene-butadiene copolymers (SBR), acrylics, or vinyl acetate-ethylene (VAE) — with a high solids content. It is a milky white liquid with a milk-like consistency and a mild characteristic odor. It is often combined with metakaolin and silica fume for high-performance mortars.

Added to the mixing water of mortars and concretes, the latex distributes evenly throughout the cement matrix and, during curing, forms a continuous polymer film that intertwines with the cement hydrate crystals, creating a cement-polymer composite with significantly superior performance compared to traditional cement.

Technical characteristics

  • Appearance: milky white liquid
  • Polymer base: styrene-butadiene copolymer (SBR) or acrylic
  • pH: alkaline (pH 9-11), compatible with cement
  • Stability: stable when mixed with cement, sand, and water

Benefits of latex in cement mortars

  • Improved adhesion: latex dramatically increases the adhesion of the mortar to substrates, even on smooth, glassy, or difficult surfaces such as steel, ceramics, and polished concrete.
  • Flexibility and deformability: the polymer film gives the mortar a certain elasticity, reducing its sensitivity to thermal and mechanical deformation and its tendency to crack.
  • Reduced permeability: the latex fills the micropores of the cement matrix, significantly reducing permeability to water and aggressive agents.
  • Improved tensile and flexural strength: the polymer chains increase the composite's resistance to tensile and flexural stress.
  • Reduced shrinkage: latex reduces the hygroscopic shrinkage of the mortar during curing, limiting the formation of microcracks. See also concrete shrinkage reducers.
  • Improved workability: it gives the mixture a more plastic and cohesive consistency, improving workability and application.
  • Chemical resistance: it improves the mortar's resistance to oils, fuels, and certain chemicals.

Main applications

Cement latex is used in numerous construction applications: anchoring grouts, waterproofing mortars, adhesive plasters, and decorative systems with iron oxides.

SBR cement latex polymer additive for waterproofing mortars and anchoring grouts

Repair and restoration mortars

  • Repair of damaged concrete: mortars added with latex adhere perfectly to existing concrete and withstand thermal and mechanical stress without detaching.
  • Restoration of reinforced concrete structures: bridges, viaducts, parking garages, balconies, and structures exposed to the elements and de-icing salts.
  • Repair of industrial floors: for repairing potholes, cracks, and damaged areas in concrete floors.

Waterproofing

  • Waterproofing mortars: latex mixed with cement and fine sand produces flexible waterproofing mortars for tanks, swimming pools, foundations, and underground structures.
  • Waterproofing of terraces and balconies: as a waterproofing layer beneath flooring.

Tile and cladding adhesives

  • Improved cement adhesives: the addition of latex to standard cement adhesives improves adhesion, flexibility, and water resistance, making them suitable for difficult substrates and damp environments.
  • Tile installation on deformable substrates: wood floors, gypsum board panels, and substrates subject to deformation.

Screeds and subfloors

  • Additivated screeds: latex improves the mechanical strength, adhesion to the substrate, and abrasion resistance of cement-based screeds.
  • Underfloor heating screeds: the flexibility provided by latex reduces cracking in screeds subject to thermal cycles.

Primers and bonding agents

Latex diluted with water (1:1 or 1:2) is used as an adhesion primer applied to the substrate before applying the mortar, further improving adhesion and reducing the substrate's absorption.

Recommended dosages

  • Repair mortars: 10% – 20% by weight of cement
  • Waterproofing mortars: 15% – 25% by weight of cement
  • Tile adhesives: 10% – 15% by weight of cement
  • Screeds: 5% – 10% by weight of cement
  • Adhesion primer: latex diluted 1:1 with water, applied with a brush or roller to the substrate

How to use latex in the mixture

  1. Calculate the amount of latex needed based on the desired dosage.
  2. Mix the latex with part of the mixing water before adding the cement and sand.
  3. Add the latex-water mixture to the dry aggregates and mix until a homogeneous mixture is obtained.
  4. Adjust the consistency with the remaining mixing water if necessary.
  5. Apply within the indicated working times (generally 1-2 hours after mixing).
  6. Protect from rapid dehydration during curing (avoid drafts, direct sunlight, and high temperatures).

Precautions for use

  • Do not apply at temperatures below 5°C or above 35°C.
  • Protect from frost: latex degrades irreversibly if frozen.
  • Do not over-dilute: reducing the latex content below the minimum dosage compromises performance.
  • Store in a cool place (5°C – 30°C), away from frost and excessive heat.
  • Agitate before use if the product has been stored for a long time.

Coloring cement with iron oxides

Latex can also be colored with iron oxides for decorative applications. If you are working with colored cement mortars, we recommend our guide on how to color cement with Bayferrox iron oxides and the complete guide on how to use iron oxides for every application.

Conclusion

Our cement latex is one of the most versatile and high-performance additives for modifying cement mortars. Its ability to simultaneously improve adhesion, flexibility, impermeability, and mechanical strength makes it essential for repair mortars, waterproofing, and high-quality tile adhesives. At Pigment Al sas, we offer professional-quality cement latexes at the best market price, with technical advice to optimize dosages in your applications.

Indicative dosages

Application Dosage by weight of cement
Repair mortars 10–15%
Waterproofing 15–20%
Anchoring grouts up to 30%
Primers and bonding agents dilution 1:1 or 1:2 with water
Screeds and subfloors 10–15%

The values are indicative: the dosage must always be verified on the product data sheet and with the actual mixture, reducing the mixing water in proportion to the added latex.

FAQ – Frequently Asked Questions

What is cement latex and what is it used for?

Cement latex is an aqueous dispersion of synthetic polymers (SBR, acrylics, or VAE) that is added to the mixing water of mortars and concretes. It improves the adhesion, flexibility, impermeability, and mechanical strength of the hardened product.

What is the dosage of cement latex?

The typical dosage of cement latex is 10–20% by weight of cement, replacing part of the mixing water. For anchoring grouts, it can reach up to 30%.

What is the difference between SBR and acrylic cement latex?

SBR latex offers greater flexibility and abrasion resistance, ideal for structural repairs and waterproofing. Acrylic latex has better UV and weather resistance, preferred for plasters and coatings exposed to the outdoors.

Is cement latex compatible with all types of cement?

Yes, cement latex is compatible with Portland cement, white cement, and hydraulic binders in general. It is not compatible with gypsum or calcium sulfate-based binders.

Can I use cement latex to waterproof a tank or swimming pool?

Yes, SBR latex is widely used to waterproof tanks, swimming pools, foundations, and underground structures. It should be applied in multiple coats to a clean, dust-free substrate.

Contact us for information or to receive the data sheet

Available in 25 kg pails - 200 kg drums and 1000 kg IBCs