Chrome Green: Properties, Dosages and Applications

What is chrome green?

Chrome green is an inorganic pigment based on chromium(III) oxide, formula Cr₂O₃ and Colour Index Pigment Green 17. It is evaluated for concrete, mortars, lime, mineral paints and ceramics when alkaline stability, light resistance and documented thermal performance are required.

In short: in concrete, chrome green is dosed at approximately 0.5–5% by weight of cement. Suitability, EN 12878 compliance, maximum temperature and safety classification must be verified in the documentation for the specific grade.

Technical properties

Parameter Indication
Formula Cr₂O₃, chromium(III) oxide
Colour Index Pigment Green 17
Shade Dark green, olive or mineral green depending on the grade
Alkaline stability Generally high; check the technical data sheet
Light resistance Generally high for suitable inorganic grades
Thermal stability Depends on the grade and application cycle
Compliance EN 12878 and REACH to be verified on the specific product

Dosages for concrete and mortars

Chromatic target Indicative dosage by weight of cement Note
Light green 0.5–1% White cement promotes lighter shades
Medium green 1–3% Check aggregates and water/cement ratio
Intense green 3–5% Evaluate the saturation point with tests

The values are formulation references. The final color depends on the cement, aggregates, finish and curing; always prepare a sample with the actual mixture.

Main applications

Application Indication
Concrete and precast products Use a grade documented for cementitious matrices
Mortars and plasters Check compatibility with cement or lime
Decorative flooring Evaluate color, abrasion and finish in the complete system
Mineral paints Check dispersion and compatibility with the binder
Ceramics and glazes Check temperature and interaction with the firing cycle

Chrome green and other green pigments

Cr₂O₃ should not be confused with organic green pigments, color mixtures or hydrated chromium oxide. These materials may have different shades and performance. For the general overview and commercial synonyms, also consult green chromium oxide and green iron oxide.

How to use it in the formulation

  1. Define the grade based on the matrix and technical documentation.
  2. Premix the pigment with part of the dry components or pre-disperse it according to the system.
  3. Keep water, binder, mixing times and curing constant.
  4. Compare dry samples before finalizing the dosage.

Comparison with inorganic blue pigments

Chrome green and cobalt blue belong to different chemical families, but both are evaluated for demanding mineral applications. Consult the guide to blue pigments for construction and the in-depth guide on cobalt blue.

Chrome green FAQs

Which green pigment can be used in cement?

Chrome green Cr₂O₃ is a frequent technical choice. Suitability and EN 12878 compliance must be verified on the specific grade.

How much chrome green is needed in concrete?

As an initial reference, 0.5–5% by weight of cement is evaluated, defining the dosage with tests on the actual mixture.

Is chrome green the same as hexavalent chromium?

No. Cr₂O₃ contains chromium in the +3 oxidation state, but classification and precautions must be obtained from the SDS of the specific product.

Is it suitable for ceramics?

It can be used in ceramics and glazes if the grade is compatible with the temperature, atmosphere and composition of the firing cycle.

Is it the same as hydrated chromium oxide?

No. The anhydrous Cr₂O₃ pigment and hydrated forms have different compositions, shades and thermal behavior.

Are there green iron oxides?

Common iron oxides do not produce a green equivalent to Cr₂O₃. “Green iron oxide” may be used commercially improperly or for mixtures: always check the composition.

Chrome green Cr₂O₃ powder for concrete, mortars and ceramics

For technical data sheets, samples or application support, contact Pigment Al.