Coating Additives
Complete Technical Guide
Coating additives used in the formulation of water-based paints, water-based enamels, and paint products are auxiliary agents that play a fundamental role in ensuring the quality, stability, and optimal performance of the finished product. Among these, dispersants, wetting agents, defoamers, biocides, coalescents, and thickeners form the basis of any professional formulation.
To view the commercial selection of coating and paint additives offered by Pigment Al, visit the coating additives page, with products and quote requests.
Choosing the right additives means achieving paints with better coverage, long-term stability, ease of application, and resistance to weathering. In this technical guide, we analyze the main categories of auxiliary agents used in paint shops and the production of water-based paints, with links to dedicated in-depth information for each category.

Dispersants
Dispersants facilitate the uniform distribution of pigments and fillers in the aqueous formulation, reducing the tendency to agglomerate and flocculate.
Main benefits: reduced grinding times, better color development, storage stability, and increased coverage.
→ Read the complete guide on dispersants
Wetting Agents
Wetting agents are surfactants that reduce the surface tension of water, promoting the wetting of pigment particles and the substrate during application. They are divided into anionic, non-ionic, and silicone types, each with specific characteristics for different types of formulations.
→ Read the complete guide on wetting agents
Defoamers
Defoamers prevent the formation of air bubbles during the production and application of paints. They are available in mineral, silicone, and polymer formulations for liquid systems, and in powder form for preblended cement mortars.
→ Read the complete guide on defoamers
Biocides and Preservatives
Biocides are divided into two categories: in-can preservatives, which protect the paint from microbial degradation during storage, and dry-film biocides, which protect the dried film from the growth of algae and fungi on exterior facades.
→ Read the complete guide on biocides and preservatives
Coalescents
Coalescents are slow-evaporating solvents that promote the formation of a continuous and uniform film during the drying of polymer dispersion-based paints. They lower the MFT (Minimum Film-forming Temperature) and improve film resistance. They are available in traditional and low-VOC versions compliant with Directive 2004/42/EC.
→ Read the complete guide on coalescents
Emulsion Waxes
Water-based emulsion waxes are auxiliary agents used in water-based industrial formulations. The choice of type should be evaluated based on the system, compatibility with other components, and the desired effect; dosage and performance must be verified in the technical documentation of the selected grade.
→ Discover the emulsion waxes available at Pigment Al and consult the technical guide to emulsion waxes.
Thickeners (HEC and HEUR)
Thickeners regulate the viscosity and rheology of the paint, ensuring the right consistency for application and preventing dripping. Cellulose ethers HEC offer excellent splash resistance, while polyurethane thickeners HEUR ensure excellent film leveling for satin and glossy paints.
→ Read the complete guide on HEC and HEUR thickeners
Indicative Dosages
- Inorganic dispersants: 0.2% - 0.5% by total weight
- Organic dispersants: 0.3% - 1.0% by total weight
- Wetting agents: 0.1% - 0.5% by total weight
- Defoamers: 0.1% - 0.3% by total weight
- In-can preservatives: 0.05% - 0.2% by total weight
- Coalescents: 2% - 5% by polymer dispersion weight
- HEC thickeners: 0.2% - 0.8% by total weight
- HEUR thickeners: 0.3% - 1.0% by total weight
Formulation Tips
- Add dispersants and wetting agents to the aqueous phase before introducing the pigments.
- Always test the compatibility between the different additives before proceeding with large-scale production.
- Dose defoamers carefully: an excess can cause surface defects in the dried film.
- Add HEURs to a nearly completed formulation and allow them to equilibrate for 24 hours before assessing the final viscosity.
- Store auxiliary agents in a cool, dry place, away from heat sources and direct light.
Conclusions
The choice and correct use of dispersants, wetting agents, defoamers, biocides, coalescents, and thickeners are decisive for the quality of water-based paints and paint products. A well-balanced formulation ensures stability, ease of application, aesthetics, and long-term durability. At Pigment Al sas, we offer a complete selection of auxiliary additives for the professional formulation of paints and building products, with technical support to optimize your recipes. Write to us here or at info@pigmental.it.
Frequently Asked Questions About Coating Additives
What are dispersants for water-based paints?
They are additives that facilitate the distribution of pigments and fillers in the aqueous phase and reduce the tendency to agglomerate and flocculate.
What is the dosage of defoamers in paints?
The guide lists 0.1–0.3% by total formulation weight as an indication. The actual dosage must be verified in the technical data sheet and with tests: an excess can cause surface defects in the dried film.
What is the difference between HEC and HEUR thickeners?
HECs belong to the cellulose ether family; HEURs are associative polyurethane thickeners. Both families regulate rheology, but the result depends on the selected grade and the formulation. The choice should be verified with viscosity measurements and application tests.
What are coalescents used for in water-based paints?
They promote the formation of a continuous film during the drying of polymer dispersions, helping to lower the minimum film-forming temperature. The dosage depends on the binder and the application conditions.