To choose iron oxide for concrete, it is not enough to identify the desired color. The result depends on the type of pigment, the cement, the aggregates, the water/cement ratio, the dosage, and the production and curing conditions. The correct choice is confirmed by samples made using the same mixture intended for use on site or in prefabrication.
This guide focuses on the selection of pigment for concrete and cement mortars. For a broader overview of families, colors, and applications, consult the general guide to iron oxides; for supply, you can consult the Pigments and Oxides collection.
Which iron oxide color should you choose?
| Pigment | Indicative formula | Obtainable colors | Selection notes |
|---|---|---|---|
| Red oxide | Fe₂O₃ | Red, brick, terracotta, pink | The shade depends on the grade, the cement, and the dosage. |
| Yellow oxide | FeOOH | Yellow, ochre, sand | Check the stability of the grade with respect to the process temperatures. |
| Black oxide | Fe₃O₄ | Dark gray, anthracite, black | The result varies significantly with the cement and water/binder ratio. |
| Brown oxide | Grades and mixtures based on iron oxides | Brown, earth, warm tones | Request the code and technical data sheet of the specific grade. |
| Orange oxide | Specific grades and mixtures | Orange and terracotta | Confirm the shade with a sample in the actual mixture. |
The green used to color concrete is often based on chromium oxide (Cr₂O₃), not iron oxide. Therefore, it must be identified and evaluated as a distinct pigment.
How do cement and aggregates affect the color?
Cement constitutes an important part of the chromatic background. Gray cement and white cement can produce visibly different results with the same pigment. Sand, gravel, fillers, and water can also change the perceived shade, especially in exposed surfaces.
To compare pigments, keep constant:
- type and batch of cement;
- type, color, and particle size of aggregates;
- water/cement ratio and paste consistency;
- dosage and method of pigment dispersion;
- mixing times, finishing, and curing conditions.
Iron oxide dosage in concrete
There is no percentage that is valid for every pigment and every mixture. The dosage must be defined based on the grade's technical data sheet, the required shade, and the formulation. When expressed as a percentage of cement, it must not be confused with the percentage of the total weight of the concrete or the total binders.
An indicative range reported in some applications does not replace the manufacturer's instructions. Increasing the pigment beyond what is necessary does not guarantee a proportional increase in intensity and can affect the workability and cost of the mixture.
How to perform a reliable color test
- Select the pigment grade and consult the relevant technical data sheet.
- Prepare a reference mixture with the cement and aggregates intended for production.
- Make samples with different dosages, keeping the other components unchanged.
- Record the dosage calculation basis and the mixing conditions.
- Evaluate the color after curing, not just on fresh concrete.
- Repeat the test if the cement, aggregates, water, or production process changes.
For pavements and exposed products, it is useful to keep an approved sample as a reference for subsequent productions.
Powder or granulated pigment?
The choice between powder and granules depends on the plant, the dosing system, dust management, and the method of dispersion. Granules can be useful in certain automatic dosing systems; they are not automatically more suitable for every plant. Always check the manufacturer's instructions and compatibility with the mixing procedure.
Which documents should you check?
Before purchasing, request the technical data sheet and safety data sheet of the proposed grade. For pigments intended for cement- or lime-based construction materials, check any documentation related to EN 12878 for that specific product and the intended application. Do not extend a declaration of conformity from one grade to an entire family of pigments.
Iron oxides for cement: guides and related products
- Iron oxides: types, properties, and applications
- How to color cement with pigments
- Bayferrox iron oxides: colors and grade selection
- Red iron oxide
- Black iron oxide
- Pigments and oxides available in the catalog
Request information for your application
To evaluate a pigment, indicate the desired color, type of cement, aggregates, application, already tested dosage, and planned quantity. Pigment Al can check the availability and documentation of the grade to be submitted for your evaluation.
Contact Pigment Al for information and quotes.
Frequently asked questions
Which iron oxide is used for red concrete?
Red pigments based on iron oxide, commonly Fe₂O₃, are evaluated. The grade must be chosen based on shade, tinting strength, technical data sheet, and testing in the actual mixture.
How much pigment is added to cement?
The dosage depends on the grade and the required result. Follow the technical data sheet and always specify whether the percentage refers to the weight of the cement or another base.
Does white cement change the final color?
Yes. The color of the binder influences the chromatic background and can significantly change the obtained shade compared to gray cement.
Can iron oxides be mixed together?
It is possible to make pigment mixtures to obtain intermediate shades, but the proportions must be defined with color tests in the actual formulation.
Does EN 12878 apply to all iron oxides?
Conformity must be verified on the documentation of the individual grade and in relation to the intended use. It cannot be assumed for every pigment in the same family.