What are additives for water-based paints?
Additives for water-based paints are chemicals added in small quantities to water-based formulations to control rheology, stability, workability, and film durability. Each category — thickeners, dispersants, wetting agents, defoamers, coalescents, biocides — serves a specific and essential function in the formulation of paints and wall coatings.
Main categories of additives
Thickeners
They control the viscosity and rheological behavior of the paint. They are divided into HEUR associative thickeners (polyurethanes) and HEC thickeners (cellulose ethers). HEURs ensure excellent leveling and low spatter; HECs are economical and compatible with almost all systems. Typical dosages: 0.3–1.5% by total weight. → Technical guide to HEC and HEUR thickeners
Dispersants
They stabilize pigments and fillers in suspension, preventing flocculation and improving color yield. There are inorganic (polyphosphates) and organic (polyacrylates, polycarboxylates) dispersants. Dosages: 0.2–1.0% by powder weight. → Technical guide to dispersants
Wetting agents
They reduce the surface tension of water, promoting the wetting of pigments, substrates, and hydrophobic organic pigments. They are low-foaming non-ionic or anionic surfactants. Dosages: 0.1–0.5%. → Technical guide to wetting agents
Defoamers
They eliminate or prevent foam formation during mixing and application. They are divided into milling defoamers (during dispersion) and can defoamers (for the stability of the finished product). Dosages: 0.05–0.3%. → Technical guide to defoamers
Coalescents
They facilitate the formation of the polymer film by lowering the MFFT (minimum film-forming temperature), which is essential in systems with high-Tg polymers. → Technical guide to coalescents
Biocides
They protect the product in the can from microbial growth (in-can biocides) and the dried film from algae and fungi on facades (film biocides). A mandatory component in any professional formulation.
Plasticizers
They increase the flexibility of the film and lower the MFFT without migrating out of the film over time, unlike coalescents. → Technical guide to plasticizers
Fragrance essences
They mask the characteristic odor of binders and additives, improving the end user's perception of the product. → Technical guide to fragrance essences
How to choose the right additives
The choice depends on the type of binder (acrylic, vinyl, styrene-acrylic), the application substrate, the particle size of the fillers, and the performance objectives. It is always recommended to test the compatibility between additives on a sample before scaling up production.
Frequently Asked Questions (FAQ)
Which additives are mandatory in a water-based paint formulation?
The bare minimum is: dispersant, thickener, defoamer, and in-can biocide. All others depend on the type of paint and the intended application.
How do you calculate the dosage of additives for water-based paints?
The dosage is always calculated based on the total weight of the formulation. Start with the minimum values recommended by the supplier and optimize them through rheological and accelerated stability tests.
Do additives affect the color of the paint?
Generally no, if used at the correct dosages. Some wetting agents and coalescents may slightly affect the gloss of the film — always check on a sample before production.