Additives for Mortars and Concrete: A Guide to Selection and Applications

Additives for mortars and concrete: what are they used for

Additives for mortars and concrete are products added to the mix to modify one or more of its properties in the fresh or hardened state. The choice depends on the material to be produced, the binder, the aggregates, the production process, and the required performance. There is no single package of additives suitable for all mixtures: every combination must be verified using the technical data sheets and preliminary tests.

In this guide, we distinguish chemical additives from mineral additions and reinforcement materials, which are often evaluated together in the formulation but serve different purposes.

Main families of additives and functional materials

Superplasticizers for concrete

Superplasticizers make it possible to increase workability or reduce the water content of the mix while maintaining the same consistency, depending on the product and the mixture. The families include, among others, formulations based on polycarboxylates (PCE) and naphthalene sulfonates (SNF/PNS). Dosage, workability retention, and compatibility must be verified in the technical data sheet and through tests on the cement actually used. Read the guide to superplasticizers for concrete.

Cellulose ethers for mortars and plasters

Cellulose ethers, such as HPMC and other specific grades, can contribute to water retention, consistency, and the workability of preblended mortars. The choice depends on the binder, formulation, open time, and application method. Not all grades are equivalent, and the dosage must be based on the basis specified by the manufacturer. See the guide to cellulose ethers and the detailed information on cellulose ethers for mortars and plasters.

AR glass fibers for mortars and concrete

Alkali-resistant glass fibers can be used in specific cementitious matrices for distributed reinforcement and microcrack control. The type, length, dosage, and addition method depend on the application and the product. Fibers do not automatically replace mesh or reinforcement specified in the design. To distinguish the available versions and their respective uses, see the guide to Fibratec glass fibers.

Silica fume and other mineral additions

Silica fume is a fine mineral addition used in specific cement formulations. It can modify the water demand, rheology, and performance of the matrix; its use requires careful design and an assessment of any superplasticizers. It is not a chemical additive and should not be confused with a simple consistency adjuster.

Metakaolin

Metakaolin is a pozzolanic material obtained from the heat treatment of kaolinitic clays. It can be used in some formulations to modify the microstructure and performance of the cementitious material. Its suitability and dosage must be verified on the mixture and in the product documentation.

Pigments and iron oxides

Iron oxides are inorganic pigments used to color concrete, mortars, and other compatible materials. The shade depends on the pigment, cement, aggregates, dosage, and curing. For use in cementitious materials, check the documentation for the specific grade, including any EN 12878 compliance. Read the guide to iron oxides.

Shrinkage reducers and evaporation retarders

Shrinkage reducers and evaporation retarders act on different aspects of concrete behavior. The choice depends on the type of shrinkage to be controlled, the environmental conditions, and the application phase. They are not interchangeable and do not replace proper design, placement, and curing. Read more about shrinkage reducers for concrete and evaporation retarders.

Chemical additive, mineral addition, or fiber: what are the differences?

Category General function Essential verification
Chemical additive Modifies a property of the mix even at relatively low dosages. Dosage, compatibility, declared performance, and conditions of use.
Mineral addition Enters the formulation as a fine material or reactive/filler component. Reactivity, fineness, water demand, and contribution to the mixture.
Fiber Introduces distributed reinforcement or a specific function into the matrix. Material, geometry, dispersion, dosage, and design requirements.
Pigment Gives color to the compatible matrix. Coloring strength, shade, dispersion, and application documentation.

How to choose additives for a cement mixture

  1. Define the application: preblended concrete, precast concrete, mortar, plaster, screed, or shotcrete element.
  2. Describe the mixture: type of cement, aggregates, water/binder ratio, and mineral additions.
  3. Identify the problem or objective: workability, maintenance, water retention, color, crack control, or specific performance.
  4. Check the documentation: technical data sheet, safety data sheet, and regulatory requirements relevant to the product.
  5. Perform tests: change one variable at a time and record consistency, times, stability, and required performance.
  6. Confirm the procedure: define the order of addition, mixing, and production controls according to the manufacturers' instructions.

Compatibility between additives

Compatibility cannot be inferred from the fact that two products are both intended for concrete or mortars. Superplasticizers, accelerators, retarders, cellulose ethers, fibers, and mineral additions can interact differently depending on their composition and conditions of use. Before combining multiple products, request technical information and verify their behavior in the complete formulation.

Regulations and documentation

For additives intended for concrete, standard EN 934-2 defines requirements and evaluation methods for the categories covered. Compliance must be verified for the specific product and its intended use. For pigments intended for cementitious materials, EN 12878 may be relevant; in this case too, the documentation for the individual grade must be checked. Standards should not be attributed indiscriminately to all raw materials present in a formulation.

Request information and a quote

Pigment Al provides raw materials and additives for applications in the mortar, concrete, preblended, and colorant sectors. To receive targeted information, communicate the type of product to be produced, the binder, the process, the problem to be solved, and the expected quantity.

Contact Pigment Al for technical information and quotes.

Frequently asked questions about additives for mortars and concrete

What is the best additive for concrete?

There is no single best additive. The choice depends on the required performance, the mixture, the cement, and the production and placement conditions.

Can multiple additives be used in the same mix?

Yes, when the combination is intended and verified. Compatibility and performance must be checked with tests on the complete mixture, and the manufacturers' instructions must be followed.

Do fibers replace welded wire mesh?

Not automatically. Any replacement depends on the function of the reinforcement, the loads, and the design; it must be evaluated by the responsible technician.

Do iron oxides color concrete?

Yes, iron oxide-based pigments are used to color compatible cementitious materials. Shade and dosage must be verified with samples in the actual mixture.

How is the dosage determined?

Start with the product's technical data sheet and confirm the dosage with tests. The calculation basis must be explicit and not automatically transferred between different formulations.