Special concretes: colored, architectural and draining

Special concrete refers to concrete mixtures or systems designed for specific requirements: color, architectural finish, drainage, placement method, weight reduction, or mechanical performance. They do not constitute a single product family and cannot be obtained simply by adding an admixture to a standard mix.

Among the best-known solutions are colored, architectural, pervious, self-consolidating, fiber-reinforced, and lightweight concrete. Some definitions describe the mix, others the surface or the production process. The categories can overlap: concrete can be colored and pervious, or architectural and self-consolidating.

What are the main types of special concrete?

Type or finish Main requirement Aspects to check
Mass color Coloration of the mix Pigment, binder, aggregates, water, and curing
Architectural and exposed aggregate Aesthetic quality of the surface Sampling, formwork, stripping, and uniformity
Pervious Water passage through a network of voids Mix, subbase, loads, and maintenance
Stamped or exposed aggregate Texture and decorative finish Surface technique, timing, and protection
Self-consolidating (SCC) Filling by its own weight Filling capacity, flowability, and stability
Fiber-reinforced (FRC) Contribution of fibers to material behavior Fiber type, dispersion, and required performance
Lightweight Density reduction Density, strength, and intended use
High-performance or ultra-high performance Specific performance requirements Mix design and testing
Semi-dry consistency for vibrocompaction Production of precast elements Filling, compaction, and demolding

The table is for guidance only: it does not automatically assign a performance to each product and does not replace the mix or structure design.

Colored concrete: mass pigmentation and uniformity

In mass-colored concrete, the pigment is incorporated into the mix. This is different from paint or a coloring treatment applied only to the surface. The final shade does not depend on the pigment alone: the color of the cement, aggregates, water content, mixing, finish, and curing also matter.

To choose the color, samples of the actual mix must be produced and evaluated after curing. Increasing the pigment does not guarantee a proportional increase in intensity. Efflorescence, moisture, and surface treatments can also change the perceived appearance.

Learn more about how to color concrete, how to choose iron oxide for concrete, and the guide to iron oxides. For managing pigment in the plant, you can also find in-depth information on granular oxides and coloring pastes; the procedures must be adapted to the cement system.

Colors and pigments: available guides

You can consult the editorial sheets dedicated to red, yellow, black, brown, and orange. For green and blue shades, the chemical families must be distinguished: read the guide to green pigment based on chromium oxide and the comparison between blue pigments for construction. Compatibility with an alkaline matrix should not be inferred from the color name.

Other in-depth information concerns pigments and their classification, Bayer/Bayferrox range oxides, and titanium dioxide. These are material guides, not recipes that can be automatically applied to every concrete.

Architectural and exposed aggregate concrete

Architectural concrete is also designed for visual results: color, texture, geometry, joints, and surface quality are part of the design. It does not refer to a single composition. For a uniform exposed aggregate finish, the mix, formwork, stripping, placement, and curing must be evaluated together, preferably through representative sampling.

Textures can come from formwork and molds; surface relief does not equate to a different performance class of the mix. Read the in-depth information on concrete molds and formwork release agents.

Washed stone and stamped concrete: two different finishes

In washed stone or exposed aggregate concrete, the surface paste is controlledly removed to expose the aggregates. In stamped concrete, however, a texture is impressed on the fresh surface. Appearance, operating methods, and material selection differ: they should not be presented as synonyms.

For the already available in-depth information, consult architectural concrete and washed stone, retarding lacquer, and retarding paper for washed concrete. The surface treatment must be chosen based on the actual cycle and verified with preliminary tests.

Pervious concrete, also colored

Pervious concrete features interconnected voids that allow water to pass through. However, a pervious pavement is a system: the subbase, the soil's capacity to receive or drain water, loads, and maintenance all contribute to the result. The permeability of the surface layer alone does not guarantee the absence of standing water throughout the structure.

Pervious concrete can be colored, but pigmentation, mix, and processing must preserve the required behavior. Coatings that close the pores can hinder drainage. There is no universal flow rate or durability that can be attributed to all products.

Read the complete guide to pervious concrete for specific in-depth information.

Self-consolidating concrete: SCC

Self-consolidating concrete, or SCC, is designed to flow under its own weight and fill the formwork without compaction vibration, maintaining homogeneity. The evaluation includes filling capacity, flowability through reinforcement, and resistance to segregation. A very fluid mix is not automatically self-consolidating.

For the components that can be included in the formulation, consult the guide to superplasticizers. The choice and dosage of the admixture must be verified together with the other constituents, not in isolation.

Fiber-reinforced concrete: fibers and performance

In fiber-reinforced concrete, fibers are distributed in the matrix. Their contribution depends on the material, geometry, quantity, dispersion, and design. Not all fibers have the same role: controlling some microcracks and providing post-cracking structural performance are not equivalent.

The replacement of traditional reinforcement should not be decided based solely on the presence of fibers: it requires an appropriate design evaluation. To distinguish materials and fields of application, read the guides to BarChip synthetic fibers, Fibratec glass fibers, and types and uses of glass fibers. The in-depth information on glass microfibers for mortars and coatings concerns a specific field and should not be automatically transferred to structural concrete.

Lightweight concrete

Lightweight concrete is characterized by a lower density compared to concrete with ordinary aggregates; one approach is the use of lightweight aggregates. Weight reduction alone does not define strength, insulation, or structural suitability: these characteristics must be declared and verified for the chosen material.

It is necessary to distinguish solutions intended for structural elements from materials for fill or other uses. A lightweight charge used in paint does not identify, on its own, a system for producing lightweight concrete.

High-performance and UHPC concrete

High-performance mixes are designed with respect to specific requirements, not just fluidity. UHPC refers to ultra-high performance cementitious composites, described in technical literature through a combination of optimized composition, mechanical behavior, and durability; in formulations treated by FHWA, fiber reinforcement is a characteristic element.

Adding microsilica is not enough to transform ordinary concrete into UHPC. Mix design, production, curing, and testing must be consistent with the required performance. The in-depth information on materials includes gray silica fume, white silica fume, metakaolin, and fly ash, without assuming they are equivalent or always interchangeable.

Semi-dry concrete and vibrocompacted elements

Semi-dry consistency describes the behavior of the mix, while vibrocompaction is a forming and compaction process. The checks concern mold filling, compaction, demolding, and final performance, not the achievement of maximum fluidity.

For this field, consult the new guide to plasticizers for cement and P TU10.

Self-healing: a field to be evaluated with caution

Self-healing concerns phenomena that can contribute to the closure or sealing of some cracks. Its effectiveness depends on the mechanism, crack opening, and exposure conditions, including the availability of water. This does not mean that any damage will repair itself or that structural capacity will be automatically restored.

You can find in-depth information in the guide to concrete self-healing. Cracks in an existing structure require an evaluation of the cause before choosing the treatment.

Admixtures, curing, and protection: cross-cutting in-depth information

Some products do not define a new type of concrete but act on the formulation, process, or surface. To orient yourself, consult the guide to admixtures for mortars and concrete and the in-depth information on retarders, evaporation retarders and curing, cement set accelerators, and cold weather working and frost protection. None of these products alone replaces the correct management of the pour.

For specific formulations, you can also find the guides to calcium formate and latex for cement. For surfaces and products already made, consult cement protection products, P Floor Protect, and lithium silicate. The in-depth information on water repellents distinguishes the uses of the product: reducing absorption does not automatically equate to waterproofing a structure.

How to choose the solution for the project

Start with the requirement: appearance, water management, production process, or performance. Then define the intended use, loads, exposure, placement method, and maintenance. Request material documentation and representative sampling, especially for colored and exposed aggregate surfaces.

For information on pigments and admixtures distributed by Pigment Al, request a technical sheet and quote, indicating the type of concrete, application, and desired result. The choice of components does not replace the design of the structure.

Frequently asked questions about special concrete

Can pervious concrete be colored?

Yes, the two characteristics can coexist. Pigmentation must be verified in the actual mix, and surface treatments must not compromise the intended drainage function.

Are architectural and stamped concrete the same thing?

No. Architectural is a broader term also referring to the aesthetic result. Stamped identifies a specific surface treatment and can fall under decorative solutions.

Is a superplasticizer enough to obtain an SCC?

No. Self-consolidating concrete requires a mix designed and verified for filling, flowability, and stability. Fluidity alone is not sufficient.

Do fibers always replace the mesh or bars?

No. Fiber type, material performance, and structural contribution must be evaluated in the design. There is no automatic replacement valid for all structures.

Is there a single dosage for pigments and admixtures?

No. The dosage depends on the product and the formulation. The calculation basis must be specified and the result verified with documentation and testing.

Technical references

This guidance uses, for general definitions, ACI, decorative concrete guide, NRMCA, Pervious Concrete, NRMCA, pervious mix design, EFNARC, definition and characteristics of SCC, ACI, lightweight concrete, ACI, design with fiber-reinforced concrete, and FHWA, UHPC materials. These are sources of in-depth information, not a declaration of conformity of the products cited.